Feed Gap Adjustment Procedure _____________________________________________ 8 software versions. 2.3.1 Counting Modes ___________________________________________________________ 11 2.3.2 MIX mode _________________________________________________________________ 11 If you have questions about your Kolibri Domino and its operation, 2.3.3 SORT mode ________________________________________________________________ 11 please contact technical support at www.kolibriusa.com/support. 2.3.4 COUNT mode ______________________________________________________________ 12 2.3.5...
About the Kolibri Domino Thank you for choosing the Kolibri Domino 1-pocket currency discriminator. The Kolibri Domino is a professional, powerful, value counter and sorter, with strong counterfeit detection and high level of performance. The Kolibri Domino has a convenient user friendly interface, intuitive touch panel, and a variety of counting modes.
10-15 minutes (to warm up the counterfeit detection sensors) Bill Loading Procedure Before loading bills and working on the Kolibri Domino, the user should check the counting mode. It is very important to place the bills into the hopper correctly, because recognition performance of the bills is highly affected by the arrangement of the bills.
Feed Gap Adjustment Procedure Sometimes, during the transportation or shipment of the unit, the adjustment of the feed 3. Place one bill that is crisp and rigid enough to prevent bending during the adjustment mechanism may loosen. This can also happen during normal wear or tear and can lead procedure.
Important Note: through the machine. When this occurs, a message The Kolibri Domino’s feed gap adjustment can be sensitive during adjustments. Do not will pop up on screen with directions for the user to overturn each adjustment or you may overshoot the optimum gap. We recommend testing...
2.3.7 ADD Mode Domino face up or face down. The first bill in the hopper determines the sorting and This mode is available from the home screen by touching the button that corresponds to the counting orientation.
AUTO BATCH 2.3.8 BATCH Mode After-Count Functions TOTAL This mode is available from the home screen by touching the BATCH icon or by This function is available from the home screen by selecting BATCH from the menu. touching the button that corresponds to the TOTAL icon, or by touching the TOTAL icon directly on the The BATCH function is used to select a batch SORT...
Allows the user to change currency. Note: USD, CAD, & EUR are the only currencies available on the Domino at this time Air duster, soft bristle brush, and cleaning cards sold seperately.
While in FACE mode, this error will occur when a bill is passed that does not conform to the facing of the first bill passed in the All parts of the Kolibri Domino need daily care and cleaning. Pay close attention to the stack sensors, which are delicate components.
3. Open the back door. Put provided laminated calibration card inside the back door opening. If, after calibrating the unit, this does not resolve the issue, please see the support section on the Kolibri USA website at www.kolibriusa.com, or contact Kolibri Support at support@kolibriusa.com for further troubleshooting.
(plus send part) Chain Error MOTOR/ROLLERS 1. Adjust Feed Gap 1. Ensure lid is properly closed Bill Loading Procedure (See page 6) Please contact Kolibri support at 2. Load Bills Properly 2. Turn unit off/on (excessive) KEEP TURNING support@kolibriusa.com or call...
For technical support, call 1-877-898-8750 • There are foreign objects or liquid inside the unit or visit www.kolibriusa.com/faq-domino/ When contacting Technical Support, please have the following available: Shipping • Product Model – Located on the back side of the machine.
Need help?
Do you have a question about the Domino and is the answer not in the manual?
Questions and answers