Listening To A Cassette; Selecting The Cassette Playback Mode; Recording A Compact Disc; Recording A Radio Program - Samsung MM-T8 Instruction Manual

Micro component audio system mp3/wma-cd/cd-r/rw playback
Table of Contents

Advertisement

Listening to a Cassette

GB
Always treat your cassettes with care; refer, if necessary, to the sec-
tion entitled "Precautions When Using Audio Cassettes" on page 26.
Switch the system on by pressing (
).
1
Open the cassette deck by pushing on the corner of the cover marked
2
PUSH EJECT ( ) until you hear a click and then releasing it.
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
3
Close the deck by pushing on it until it clicks into place.
4
To listen to...
Press ...
Side A
Tape (
) button once.
Side B
Tape (
) button twice.
Result: The cassette starts playing.
5
Press the
,
or
,
button on the remocon if necessary.
To...
Press ...
Rewind the cassette
/
Fast-forward the cassette
/
6
When you have finished playback, press
button.
4
1
6
5
5
20
Selecting the Cassette
Playback Mode
Your micro component system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press REV.MODE until the appropriate symbol is displayed.
When the display indicates... The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
USB
button.
TIMER
TIMER/CLOCK
PROGRAM/SET
button.
ON/OFF
SLEEP
REP A-B
REPEAT
MO/ST
DEMO
DIMMER
REV.MODE
REV.MODE
CD SYNC
RDS
DISPLAY
PTY
TAPE
2,3

Recording a Compact Disc

You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
Synchronised recording
This feature enables you to synchronize the start of the recording
with the start of the disc or track of your choice.
1
Switch the system on by pressing (
) .
2
Insert a blank cassette in Deck.
Press the PUSH/EJECT button (
) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
3
Load a compact disc.
Press the OPEN/CLOSE button (
) to open the CD door.
Insert a CD and press the OPEN/CLOSE button (
) to close
the CD door.
4
Press the MP3-CD/CD(√/») button.
Use the CD selection (
,
) buttons to select the desired song.
5
Press and hold CD SYNC/REC/PAUSE button.
When stopped, press and hold the button to start the recording
from the first piece of music.
Press and hold CD SYNC/REC/PAUSE button during the play-
back of CD to start the recording from the first part of the music
being played.
6
To stop recording, press
button.
Synchronised recording Funcation is available for CD only.
2
4
1
4
4
5
6
3
Direct recording
The direct recording mode enables you to start recording with any
track on the compact disc.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch the system on by pressing (
) .
2
Insert a blank cassette in Deck.
Press the PUSH/EJECT button (
) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
3
Load a compact disc.
Press the OPEN/CLOSE button (
) to open the CD door.
Insert a CD and press the OPEN/CLOSE button (
) to close
the CD door.
4
Press the MP3-CD/CD(√/») button.
Use the CD selection (
,
) buttons to select the desired song.
5
Press the CD SYNC/REC/PAUSE button.
Result:
Recording will begin.
To stop recording, press
button.
2
1
4
5
4
4
5
3

Recording a Radio Program

You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the
recording.
1
Switch the system on by pressing (
) .
2
Insert a blank cassette in Deck.
3
Select the TUNER function by pressing TUNER/BAND.
4
Select the radio station that you wish to record by pressing
or
button .
5
Press the CD SYNC/REC/PAUSE button.
Result: REC is displayed and recording starts.
6
To stop recording, press
button.
3
1
5
6
4
4
21
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents