To Use High Speed Search; To Repeat; To Repeat Section; To Use Last Memory Function - Samsung MM-T8 Instruction Manual

To use high speed search

GB
Before you begin! Connect the external USB storage device to your player.
Select USB function by using the USB/AUX button.
You can search the part you want quickly during the play
Press and hold the , button.
Whenever you press and hold the button, you can search back-
ward or forward 2X times quickly.
USB/MP3-CD/CD
MUTE
When you use the high speed search function, there is no
sound.

To repeat

Connect the external USB storage device to your player.
Before you begin!
Select USB function by using the USB/AUX button.
Press the REPEAT button during the play.
REPEAT 1 : repeat play one track only.
1 ALL : repeat play one directory only.
REPEAT ALL : repeat play the entire directories.
SLEEP REP A-B REPEAT
DEMO
MO/ST DIMMER
REV.MODE
16

To repeat section

Before you begin! Connect the external USB storage device to your player.
Select USB function by using the USB/AUX button.
Press the REP.A B button at the beginning of desired part.
1
START shows.
Press the REP.A B button at the ending of desired part.
2
END shows and section repeat is played 3 times.
Then it plays normal.
USB
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
1,2
SLEEP REP A-B REPEAT
MO/ST DEMO DIMMER
REV.MODE
Section repeat function works only within one track.

To use Last Memory function

Connect the external USB storage device to your player.
Before you begin!
Select USB function by using the USB button.
Last Memory is a function that resumes playback from the last part of
the previous listening when the user reselects USB function again
after stopping the play or selecting another function.
Press the PROGRAM/SET button,
LAST ON and LAST OFF are repeatedly selected.
USB
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP REP A-B REPEAT
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
15 AM stations
1
Switch the system on by pressing ( ).
2 Select the required frequency band by pressing TUNER/BAND
again on the front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
Frequency Modulation
FM
3
To search for a Press TUNING MODE
station...
Manually One or more times until MANUAL
is displayed.
Automatically One or more times until AUTO is
displayed.
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4 Select the station to be stored by:
Pressing or buttons on the front panel or or
buttons on the remote control to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the or buttons.
The automatic search procedure may stop on a
frequency that does not correspond to a radio station. If
this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result: The PRGM is displayed for a few seconds.
b Pressing or buttons on the front panel or or
buttons on the remote control to assign a program number .
c Press PROGRAM/SET to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station to
an existing program number.
2
1
4 5 3
4 5
BAND
TUNER 2
CD TUNER TAPE AUX
POWER
OPEN/
CLOSE
USB
TIMER TIMER/CLOCK PROGRAM/SET
5
ON/OFF
SLEEP REP A-B REPEAT
USB/MP3-CD/CD
4 5
MUTE
TUNING/
VOLUME
ALBUM
4 5
TUNING MODE
P.SOUND EQ
+10 +10 3

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing ( ) .
2 Select the required frequency band by pressing TUNER/BAND on
the front panel.
3 Select the radio station as follows.
To listen to ... Press ...
Stored station 1. the TUNING MODE button until
"PRESET" is displayed.
2. or button to select the
required program.
1
2
3
3
3

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
USB
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP REP A-B REPEAT
MO/ST DEMO DIMMER
REV.MODE
REV.MODE
CD SYNC RDS
DISPLAY PTY
17
GB