Timer Function; Canceling The Timer; Eq Function; Selecting Sound Mode - Samsung MM-T8 Instruction Manual

Timer Function

GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1 Switch the system on by pressing ( ) .
2
Press TIMER/CLOCK until TIMER is displayed.
Press PROGRAM/SET.
3
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
4
Set the hour by pressing or button.
a
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing or button.
Press PROGRAM/SET.
d
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5 Set the timer switch-off time.
Set the hour by pressing or button.
a
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing or button.
Press PROGRAM/SET.
d
Result: VOL 20 is displayed, where 20 corresponds to the
volume already set.
6
Press or button to adjust the volume level and press
PROGRAM/SET.
Result: The source to be selected is displayed.
7
Press or button to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a cassette tape.
TUNER (radio) a Press PROGRAM/SET.
b Select a preset station by pressing
or .
MP3/CD (compact disc) Load a compact disc.
USB connect usb.
8
Press PROGRAM/SET to confirm the timer.
Press ( ) to set the system to standby mode.
9
Result: is displayed to the right of the time, indicating that the
timer has been set. The system will switch on and off auto-
matically at the required times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
In standby,you can press MULTI JOG(PUSH ENTER) button
instead of PROGRAM/SET button and press /
turn MULTI JOG(PUSH ENTER) knob on the front panel
22
instead of / buttons on the remote control in step 4,5,6,7..
POWER
OPEN/
CLOSE
USB
1,9
2
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
3,4,5,6,7,8
SLEEP REP A-B REPEAT
MO/ST DEMO DIMMER
REV.MODE
CD SYNC RDS
DISPLAY PTY
TAPE
USB/MP3-CD/CD
4,5,6,7
MUTE
TUNING/
VOLUME
ALBUM
4,5,6,7
EQ TUNING MODE
P.SOUND

Canceling the Timer

After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press TIMER ON/OFF...
Cancel the timer Once.
Result:
Restart the timer Twice.
Result:
POWER
OPEN/
CLOSE
USB
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
ON/OFF
SLEEP REP A-B REPEAT
MO/ST DEMO DIMMER
REV.MODE
CD SYNC RDS
DISPLAY PTY
buttons or

EQ Function

Your micro component system is equipped with a preset equalizer
that allows you to choose the most appropriate
balance between treble and bass frequencies, according to the type of
music you are listening to.
Press EQ or MULTI JOG(PUSH ENTER) button until the required option is
selected.
Result: Press the button repeatedly to select "EQ PASS POP
JAZZ ".
CLASSIC

Selecting Sound Mode

Your compact system is equipped with the function of Power
Sound.
The function of Power Sound amplifies bass and improves high
key or bass twice as much for you to appreciate powerful real
sound.
Press P.SOUND button until the required option is selected. Each
time the P.SOUND button is pressed, "S.BASS,P.SOUND,
OFF" is selected or cancelled in this order.
S.BASS Function : S.Bass function emphasizes the bass sound to pro-
is no longer displayed.
duce the effect of explosion or booms.
is displayed again.

Treble Level Function

Treble Control function stresses high tones providing thudding sound
effects.
1
Press MULTI JOG(PUSH ENTER) button until TREB 00 is displayed.
Turn MULTI JOG(PUSH ENTER) knob to select from TREB -18 to
TREB 18.
2
You can select the level of high tones you desire.
ROCK

BASS Level Function

BASS function stresses low tones providing thudding sound effects.
Press MULTI JOG(PUSH ENTER) button until BASS 00 is displayed.
1
Turn MULTI JOG(PUSH ENTER) knob to select from BASS -18 to
BASS 18.
You can select the level of low tones you desire.
2
GB
23