Receiving A Fax - Samsung SF-4500 User Manual

Receiving a Fax

Receiving a Fax
Your multi-function machine has four reception modes:
¥ In Fax mode, the machine answers an incoming call and immediately
goes into receive mode, waiting for a fax to be sent.
¥ In Tel/Fax mode, the machine answers an incoming call expecting to
receive a fax. If the machine does not sense a fax signal, it will continue to
sound the ringing tone to tell you it is a phone call. If you do not lift the
handset during the ringing, the machine will switch to automatic fax
reception mode.
¥ In Ans/Fax mode, the answering machine answers an incoming call, and
the caller can leave a message on the answering machine. If the fax
machine senses a fax tone on the line, the call automatically switches over
to the fax machine. To use Ans/Fax mode, you should attach an
answering machine (TAD) to the EXT socket on your fax machine (see
page 1.6).
¥ In Tel mode, automatic fax reception is turned off. You can receive a fax
only by manually picking up the handset and pressing Start.
The lamps located above the Rcv. Mode button indicate the selected
reception mode.
If you seldom use the fax line for voice conversations, set the fax machine
to receive a fax automatically by selecting either Fax or Tel/Fax mode.
¥ While you print a PC file, an incoming fax will be received and stored
in memory. If you have a lot of pages to print, we recommend stopping
PC printing to prevent memory from becoming full.
2.19
Receiving a Fax