Samsung SF-4500 User Manual page 102

Paper Feeding Problems (continued)
Symptom
Paper fails to feed.
Multiple sheets of paper fed.
Paper skews or buckles in the
paper bin.
Envelopes skew or fail to
feed correctly in the paper
bin.
Transparencies stick together
in the paper exit.
Cause and Solution
¥ Make sure that there is not too much paper in the bin.
Depending on the thickness of your paper, the bin can hold
up to 130 sheets (20~24 lb).
¥ Make sure that the envelope guide is not in the envelope
position.
¥ Remove any obstructions inside the printer.
¥ Make sure that there is not too much paper in the bin.
Depending on the thickness of your paper, the bin can hold
up to 130 sheets (20~24 lb).
¥ Different types of paper may be stacked in the paper bin.
Load paper of only one type, size, and weight.
¥ When loading paper, do not force the paper down into the
printer.
¥ If multiple sheets have caused a paper jam, clear the paper
jam.
¥ Make sure that there is not too much paper in the bin.
Depending on the thickness of your paper, the bin can hold
up to 130 sheets (20~24 lb).
¥ Make sure that the paper guide does not cause the paper to
bow.
¥ Make sure that you are using the correct type of paper.
¥ When loading paper, do not force the paper down into the
printer.
¥ Make sure that the right side of the paper is aligned with the
right edge of the feeder, and the left paper guide is set
against the left side of the paper.
¥ Make sure that the envelope guide is not in the envelope
position.
¥ Make sure that the envelope guide has been turned to the
envelope load position.
¥ Make sure that the paper guide is against the left side of the
envelopes.
¥ Use only transparencies specially designed for printer.
¥ Remove each transparency as it exits from the printer.
3.13
Troubleshooting