BYD HAN EV 2022 Owner's Manual
Hide thumbs Also See for HAN EV 2022:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAN EV 2022 and is the answer not in the manual?

Questions and answers

Леонид
May 29, 2025

Машина едет со скоростью не более 30 км/ ч, как это исправить?

1 comments:
Mr. Anderson
May 29, 2025

If the BYD HAN EV 2022 only drives at a maximum speed of 30 km/h, it may be due to abnormal tire pressure. The system reduces broadcast volume and may stop broadcasting above 30 km/h when tire pressure is not normal. To fix this:

1. Check if the low tire pressure warning light is on.
2. If it is, stop the vehicle safely and check tire pressure immediately.
3. Do not drive if the tire pressure does not meet manufacturer requirements.
4. Go to a BYD authorized dealer or service provider to re-match the tire pressure.

Driving with low pressure may damage the vehicle or cause injury.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for BYD HAN EV 2022

  • Page 1 OWNER’S MANUAL...
  • Page 2 Foreword Thank you for choosing BYD. To correctly use and maintain your BYD vehicle, please read through this manual carefully before use and keep it properly. Special instructions: BYD Auto Industry Co., Ltd. recommends that you choose genuine spare parts, and use, maintain, and repair the vehicle properly in accordance with this manual. The use of non-genuine spare parts to replace or modify the vehicle will affect the performance of...
  • Page 3 Sustainability As a pure electric passenger vehicle, the BYD HAN EV is an environmentally friendly product. Please visit https://reach.bydeurope.com for environmental protection information about the vehicle. It is everyone's responsibility to protect the environment. Please use this vehicle properly and dispose of any waste and cleaning materials according to local laws and regulations.
  • Page 4 Overview of BYD HAN EV Passenger Car BYD HAN EV is a pure electric passenger car featuring new energy and new power that is built to be environmentally friendly. The integration of its load-bearing body with the power battery pack fully ensures the safety of the battery and the entire vehicle.
  • Page 5: Table Of Contents

    ILLUSTRATION INDEX Keys..............48 Locking/Unlocking Doors......50 Exterior..........8 Intelligent Access and Smart Start Dashboard......... 9 System............55 Interior..........10 Child Protection Lock........57 Doors..........11 Seats..........58 Instructions for Seats........58 SAFETY Front Seats............ 58 Rear Seats............62 Seat Belts........14 Steering Wheel.........63 Introduction to Seat Belts......14 Steering Wheel..........63 Using Seat Belts..........15...
  • Page 6 IN-VEHICLE DEVICES Saving Energy and Extending Vehicle Service Life..........101 A/C System........148 Carrying Luggage........102 Introduction to Air Conditioning..... 148 Vehicle Wading Into Water......102 A/C Vents............. 153 Fire Prevention........... 103 Air Purification System......155 Starting and Driving....... 105 Switching on A/C with Cloud Service Starting the Vehicle........105 App*..............
  • Page 7 Exterior Cleaning........175 Interior Cleaning.........177 Self-Maintenance......179 Self-Maintenance........179 Sunroof Maintenance........ 181 Vehicle Storage...........181 Hood............. 182 Cooling System...........182 Braking System...........183 Washer System........... 183 A/C System..........183 Wiper Blades..........184 Tires.............. 185 Fuses.............187 WHEN FAULTS OCCUR When Faults Occur......198 If Smart Key Battery is Exhausted....198 Emergency Shutdown System....
  • Page 8: Illustration Index

    ILLUSTRATION INDEX Exterior............... 8 Dashboard............9 Interior.............. 10 Doors..............11...
  • Page 9: Exterior

    Exterior Trunk Lid P 53 Tires P 185 Carrying Luggage P 102 Snow Chains P 145 In Case of a Flat Tire P 187 Charging Port Hatch P 88 Combination Light P 67 Electric External Rearview Mirrors P 144 Hood P 182 Folding of External Rearview Mirrors Coolant P 182 P 144...
  • Page 10: Dashboard

    Dashboard Interior Rearview Mirror P 143 One-Touch Start/Stop Button P 105 Wipers P 72 A/C Switch Group P 148 Wiper Blades Maintenance P 184 Gear Shift Controls P 107 Steering Wheel P 63 Glove Box P 157 Instrument Cluster P 36 Center Vent P 153 Opening the Hood P 182 Infotainment Touchscreen P 164...
  • Page 11: Interior

    Interior Light Switch P 67 Wireless Phone Charging P 162 Cup Holder P 158 Hazard Warning Light P 77 Seat P 58 Steering Wheel Adjustment P 66 Center Console Cubby P 158 Bill Box P 159 Seat Belt Buckle P 15...
  • Page 12: Doors

    Doors Opening Doors with Interior Door Opening Trunk Lid from inside the Handle P 50 Vehicle P 53 Seat Memory Settings P 60 Opening the Hood P 182 Front Left Door Switch Group P 74 Center Console Door Lock Switches P 75 Child Protection Lock Switches P 57...
  • Page 14: Safety

    SAFETY Seat Belts............14 Airbags..............18 Child Restraint System (CRS)......25 Anti-theft System..........31 Data Collection and Processing....32...
  • Page 15: Seat Belts

    The force limiter limits the seat- belt restraint force to the occupant’s • BYD has highly emphasized that driver body to a certain extent so as to avoid and occupants should always fasten injury to the occupant due to an excessive their seat belts while in the vehicle.
  • Page 16: Using Seat Belts

    Using Seat Belts Seat Belt Pretensioning by Motor* Adjust the seat position and backrest The seat belt automatically retracts angle. (See Electrical Front Seat in a hazardous situation to effectively Adjustment*) secure the driver and passengers, and Adjust the position of the three-point automatically returns to its relaxed state seat belt.
  • Page 17 • For proper protection, the seat belt any other issues. If any problem is must be in permanent contact with found, contact a BYD authorized the occupant's body. dealer or service provider for confirmation and handling. Until then, do not use the corresponding seat.
  • Page 18 • When any seat’s belt is not • After an accident, have the seat fastened, the unfastened seat belt belts checked at a BYD authorized indicator flashes. dealer or service provider. If the preloading function is activated, the • Display of unfastened belt’s seat seat belt must be replaced with a certified one.
  • Page 19: Airbags

    Multi-collision brake (MCB) function passengers from dangers. Contact a BYD authorized dealer or service • If an accident requires front airbags provider to carry out testing. activation, the vehicle will engage...
  • Page 20: Driver And Front Passenger Airbags

    Driver and Front Seat Side Airbags Passenger Airbags If the vehicle you purchased is equipped with seat-side airbags (mounted on If the vehicle you purchased is equipped the outside of seat back, marked with with driver and front passenger airbags, "AIRBAG"...
  • Page 21: Side Curtain Airbags

    CAUTION! REMINDER • Do not wet seat backs, to prevent • To receive the optimum protection the side airbag system from from the curtain airbags, passengers malfunctioning. must fasten their seat belts and sit in an upright position against the •...
  • Page 22 • The ECU of the BYD airbag system has The vehicle's nose hits the ground when been set up with considerations of going down a steep slope. common misuse and road conditions. However, due to the increasing changes in causes and forms of vehicle collisions,...
  • Page 23 The vehicle goes under a truck or another The vehicle hits a wall or a vehicle at a side large vehicle. other than the front side. The tail of the vehicle is hit by another Parts other than the passenger vehicle.
  • Page 24 The lateral side of the vehicle hits a WARNING columnar object. • A child is not to be seated in the front passenger seat, nor are they to ride sitting on a front passenger's lap, to prevent serious injury or even casualty caused by airbag deployment.
  • Page 25 Do not change any component of the airbag system, including It is recommended that you contact any corresponding label. It is a BYD authorized dealer or service recommended that any operation provider immediately if any of the done to the airbags be performed by following situations occurs.
  • Page 26: Child Restraint System (Crs)

    • Airbags need to be removed, Child Child disassembled, installed or repaired. Group Restraint Category Weight System • Side airbags and side curtain airbags have deployed. Universal Britax Römer 22 to Semi- • An accident happening to a vehicle door 36 kg KidFix universal...
  • Page 27: Installing Crs

    Installing CRS CAUTION! • BYD Auto recommends that children Follow the installation instructions should use an appropriate CRS, and provided by the CRS manufacturer. Secure it is recommended that they are the CRS to the rear outboard seat. seated on a rear outboard seat.
  • Page 28 Open the decorative cover of the anchorage and install the CRS to the seat. Fasten the snap hook to the anchor support and tighten the top strap to ensure the strap is buckled securely. ① Top Strap REMINDER ② Anchor Support •...
  • Page 29 • Do not use a rear-facing CRS on the seat protected by a front airbag (in the active state), otherwise in the event of an accident, the impact of quick deployment of the front passenger airbag will result in serious injury or even be life-threatening to the child.
  • Page 30 CRS Suitability of Seats Seat (or Other Positions) Weight Group Front Rear Rear Middle Seat Passenger Seat Outboard Seat Group 0 (up to 10 kg) Group 0+ (up to 13 kg) Group 1 U/UF (9~18 kg) Group 2 (15~25 kg) Group 3 (22~36 kg) Note: Table definitions:...
  • Page 31 ISOFIX CRS Suitability of ISOFIX Seating Positions Seat (or Other Positions) Weight Fixed Front Rear Size Rear Group Module Passenger Outboard Middle Seat Seat Seat ISO/L1 Carrycot ISO/L2 Group 0 ISO/R1 (up to 10 kg) ISO/R1 Group 0+ ISO/R2 (up to 13 kg) ISO/R3 ISO/R2 ISO/R3...
  • Page 32: Anti-Theft System

    Anti-theft System Anti-theft OFF • Anti-theft alarm can be stopped by: Anti-theft System • Unlocking the door with a valid smart key. If the vehicle is in anti-theft state and any • Using the microswitch to unlock the door is opened, the system will sound an door by carrying a valid smart key.
  • Page 33: Data Collection And Processing

    OBD ("On Board Diagnostics") interface, for • This section provides you with some example, by BYD authorized dealer or important information on how personal service provider or other third parties. data is collected and processed when you use a BYD vehicle.
  • Page 34 Internet access and connected services • Depending on vehicle configurations, the Internet can be accessed for certain functions or BYD services through the vehicle's infotainment system network devices. • BYD is not liable for any such services provided by any other party.
  • Page 35 (e.g. data from the airbag control unit to clarify an accident). • If required by law BYD may also be obliged to disclose data upon government authority request, e.g. in the event of criminal offence...
  • Page 36: Instrument Cluster

    INSTRUMENT CLUSTER Instrument Cluster......... 36...
  • Page 37: Instrument Cluster

    Instrument Cluster Instrument Cluster View LCD Instrument Cluster Power meter Speedometer Time Total mileage Gear status Driving range Outside temperature Battery level (%)
  • Page 38 • If the instrument cluster remains in simple mode after those actions have been taken, promptly contact a BYD authorized dealer or service provider for inspection. • The image of the instrument cluster view is for reference only and is subject to actual...
  • Page 39: Instrument Cluster Indicators

    Instrument Cluster Indicators Economic mode Indicators and Warning Lights ACC speed indicator Sport mode Turn signal indicator PCW indicator (green) Position light indicator Normal mode High beam indicator AEB fault warning light* HMA indicator* Low battery warning light ICC indicator Rear fog light indicator Front fog light indicator* Driver monitoring...
  • Page 40 Unfastened seat ESC fault warning light belt warning light Driving power Airbag fault warning light limit warning light ABS fault warning light EPB indicator Snow mode indicator Parking system fault warning light BSD indicator* Steering system fault warning light AVAS OFF indicator Anti-theft indicator PCW warning light (red) Power battery...
  • Page 41 In such case, pressure is displayed as "---" on the it is recommended to contact a BYD screen, it indicates that the tire pressure authorized dealer or service provider for system is faulty.
  • Page 42 In such case, cluster, the corresponding tire is in it is recommended to contact a BYD under-pressure condition. When the authorized dealer or service provider for temperature value of one or more tires vehicle inspection as soon as possible.
  • Page 43 ECU, this warning light will light up, and collision sensors, inflation device, it is recommended to contact a BYD warning lights, connections, and power authorized dealer or service provider supply.
  • Page 44 • The steering system features an so. It is recommended to contact a BYD electric motor to reduce the force authorized dealer or service provider for required to turn the steering wheel.
  • Page 45 This warning light goes on when the warning light system. In such case, vehicle power has just been switched to it is recommended to contact a BYD the "OK" position. If the power battery authorized dealer or service provider for system is working properly, this warning vehicle inspection as soon as possible.
  • Page 46 Door status indicator • When any door, the trunk or the hood is not closed, the indicator indicates the vehicle body and corresponding status. When the vehicle speed exceeds a certain value, the message "Door, trunk or hood not closed" will be displayed. Motor coolant overheating indicator •...
  • Page 48: Controller Operation

    CONTROLLER OPERATION Doors and Keys..........48 Seats..............58 Steering Wheel..........63 Switches............67...
  • Page 49: Doors And Keys

    » The smart key battery may be exhausted. Check the smart key battery. If the battery needs to be replaced, contact a BYD authorized dealer or service provider. • If the smart key is lost, contact a...
  • Page 50 Electromagnetic waves may have to copy it at a BYD authorized dealer or unpredictable consequences for the service provider. use of such medical devices.
  • Page 51: Locking/Unlocking Doors

    Insert the mechanical key into the hole and turn the key. • Unlock the driver’s side door by turning the key clockwise. • Lock the driver’s side door by turning the key counterclockwise. REMINDER • Be sure to store the number plate in a safe place and do not leave it in your vehicle.
  • Page 52 • If any door is not closed properly, the WARNING external rearview mirrors will not fold, the turn signals will not flash, the four • If there are children in the vehicle, door handles will not retract, and the make sure to enable the child alarm will sound once.
  • Page 53 Raising/Lowering Windows with Locking/Unlocking with Smart Key Microswitch • When the ignition is switched off: Locking • Press and hold the lock button • With the ignition switched off and on the smart key to raise the four doors closed but not locked, press the windows.
  • Page 54 Unlocking the trunk lid with REMINDER microswitch • If the smart key is too close to the • With the vehicle locked, press the rear exterior door handle or window, the microswitch while carrying a valid key, entry function may not be activated. to open the trunk lid.
  • Page 55 ① Trunk lid close button Emergency trunk lid unlocking from inside the vehicle • With the trunk lid opened and stationary, press the trunk lid close Flip the rear central armrest to open its switch. The trunk lid then closes. decorative cover.
  • Page 56: Intelligent Access And Smart Start System

    Locking/Unlocking with Center Emergency Vehicle Locking with Console Door Lock Mechanical Key Locking or unlocking the vehicle with • When the center console lock fails, lock the center console door lock the front left door with the mechanical key. Use the key to turn the emergency See "...
  • Page 57: Start-Up Function

    Start-up Function REMINDER The smart access and start system may With the smart key inside, press the brake not work properly when: pedal and the Start/Stop button to start the vehicle. (For details, see Starting the • There is a strong electromagnetic Vehicle from Inside.) field nearby, such as TV towers, power stations, and broadcasting...
  • Page 58: Child Protection Lock

    • If the smart access and smart start systems cannot work properly due to system failures, bring all smart keys to a BYD authorized dealer or service provider for repair. Saving battery power • To activate child protection locks, press •...
  • Page 59: Seats

    Seats WARNING • Do not put the seat back down Instructions for Seats while driving or riding in the vehicle. Because the shoulder strap of the seat belt is not properly attached to your body, you and your passengers • Adjust the driver’s seat so that the could hit the strap in an accident, pedals, steering wheel, and dashboard...
  • Page 60: Lumbar Support Adjustment

    Lumbar Support Adjustment ① Seat position adjustment switch • Toggle the seat position adjustment The seat back profile can be adjusted to fit switch back or forth to move the seat the curvature of the occupant’s lumbar backward or forward. spine.
  • Page 61: Memory System

    Electrical Front Passenger Memory setting function Seat Adjustment by Rear-Seat • Memory setting conditions Occupants • The vehicle is powered on with no vehicle speed. ① Seat position adjustment switch • Seats and left & right external • Move the seat position adjustment rearview mirrors have been adjusted switch back or forth to move the seat to their required positions.
  • Page 62 • The vehicle has no speed. Heating system adjustment • Memory switch signals are valid. • Seat heating: Control the operation mode of the heating pad by using Greeting function the seat heating switch. The heating function has two modes: Mode 1 and •...
  • Page 63: Rear Seats

    Rear Seats Rear Seat Adjustment* • The rear seat adjustment handle is located on the trim of rear door. • Pull back the handle to move the seat back backward. • Push forward the handle to move the seat back forward.
  • Page 64: Steering Wheel

    Steering Wheel Steering Wheel Panoramic view Mode Custom Left Distance - Roller Distance + Right +/Reset or -/Set Speech recognition Lever Call DiPilot Instrument cluster/Back...
  • Page 65 The audio control switch is available when REMINDER the ignition switch is on OK. • For more information on how to Left-hand buttons use the cruise control function, see Adaptive Cruise Control (ACC) +/Reset System. • Activates the ACC system and invokes the parameter in the previous system Right-hand buttons setting.
  • Page 66 • In USB/Bluetooth music/third-party • When Bluetooth is connected, but no music app and other modes: phone number is entered on the main dial page, press this button to switch to • Press the button to play the the Dialed Number page under the call history page.
  • Page 67 Manual Adjustment of Steering REMINDER Wheel* • Observe the traffic laws and use the horn reasonably. • To adjust the angle or axial position of the steering wheel, do the following while holding the steering wheel: Electrical Adjustment of • Press the steering wheel adjustment Steering Wheel* handle down to adjust the steering...
  • Page 68: Switches

    Voice control: Enable or disable steering REMINDER wheel heating by using the wake-up voice function. • If steering feels light when driving at high speeds, set the power-assisted steering mode to the Sport mode. CAUTION! • The steering wheel heating function automatically turns off...
  • Page 69: Position Lights

    Auto lights Low beam Turn the knob at the end of the light switch Turn the knob at the end of the light switch to " ". The BCM captures the brightness to " " to turn on the low beam. data from the light intensity sensor to automatically turn the position lights and low beam on or off.
  • Page 70 High beam Turn signals Turn the knob at the end of the light switch • Push up the combination switch light to the " " and push the light switch handle. The right turn signals and the turn signal indicator on the instrument handle down (away from the steering cluster starts flashing at the same time.
  • Page 71 • Disabling of the auto light off function: • Leave-home lighting: When the vehicle is powered on, the • You can set the time for the auto light off function is disabled, leave-home lighting delay on the and the light knob can be operated infotainment system (default: 10 normally.
  • Page 72 Activating HMA Recommended Headlight • Rotate the light switch knob to Vehicle Loading Height Conditions When the vehicle speed is above 35 Adjustment km/h and the light meets conditions, Level HMA is automatically activated and switches between low beam and high All the seats occupied beam based on the current driving environment.
  • Page 73: Wiper Switch

    • : Point-wiping road surface, etc. CAUTION! • It is recommended to contact a BYD authorized dealer or service provider for sensor calibration after collision or sensor reinstallation, so as to avoid affecting system performance. • To select a mode, push up or pull down the lever.
  • Page 74 • To use the automatic wiper function, WARNING turn the wiper switch to the automatic mode, and toggle "Automatic Wiper" on • The rain sensor cannot adequately (infotainment system) → Vehicle recognize each rainfall and activate Settings → Greeting. wipers. When rainwater on the front windshield affects visibility, •...
  • Page 75: Front Left Door Switch Group

    Front windshield washer Automatic operation (when equipped with anti-pinch feature) Pull up (toward the steering wheel) the • Rolling down: Press the switch to wiper switch for the system to only sprays the second notch and release. The water without wiping if pull-up time is corresponding window rolls down short (within 0.5 seconds), or spray water automatically.
  • Page 76 The anti-pinch function may fail right before the window is fully close. • When the auto raise and anti-pinch functions do not work, contact a BYD authorized dealer or service provider. Buttons for External Rearview Mirror Adjustment Button for selecting external rearview mirrors...
  • Page 77: Odometer Toggle Switch

    Buttons for external rearview mirror • The mileage per trip (Mileage 1 or Mileage 2) is calculated using a trip adjustment odometer. Press this button to adjust the external rearview mirror lens to a right position. Mode Switch Group Button for external rearview mirror folding These switches enable drivers to set the vehicle into regenerative braking, snow, or...
  • Page 78: Hazard Warning Light Switch

    Hazard Warning Light • Move down the lever ③ to switch the vehicle to the SPORT mode. Switch • Move down the lever ③ repeatedly to cycle through NORMAL → SPORT → ECO When the button is pressed, all turn →...
  • Page 79 Opening/Closing Sunshade Opening the sunroof • Press and hold the sunroof open button Opening the sunshade to open the sunroof manually. Release the button midway to stop the • Press and hold the sunshade open sunroof. button ① to open the sunshade manually.
  • Page 80: Initialization Method

    Sunroof Anti-pinch CAUTION! • The sunroof and sunshade are If the sunroof or sunshade closing process initialized at the same time. is obstructed by anything, it will stop and slightly retract. E-Call Switch WARNING • Keep clear of the sunroof when it is Emergency Rescue E-Call opening or closing.
  • Page 81: Interior Light Switch

    Interior Light Switch • Tap on → Vehicle settings → Light & ambient to set: Front Interior Lights • Ambient light colors In any ignition status, touch the cover of front interior lights to turn on the lights. Side Interior Lights •...
  • Page 82: Using And Driving

    USING AND DRIVING Instructions for Charging/Discharging..82 Battery.............. 97 Usage Guidelines..........100 Starting and Driving........105 Driving Assistance Functions......113 Description of Other Main Features..143...
  • Page 83: Instructions For Charging/Discharging

    • Charging may affect medical or vehicle or charging equipment when implanted electronic devices. Consult charging, stop immediately and contact the device manufacturer before a BYD authorized dealer or service charging. provider. • Charge the vehicle in a relatively safe • Always observe the following...
  • Page 84: Charging Precautions

    • Hold the charging coupler with one hand, align the coupler with the charging port and push it in, making sure that they are properly connected. • Removing the charging coupler at the end of charging: • The signs refer to standardized charging •...
  • Page 85 • When charging is complete and the • Before the charging is complete, for charging coupler is unplugged, make longer battery life, battery equalization sure that the charging port cap and is activated and thus the charging time the port hatch are closed, as water or may be longer.
  • Page 86 REMINDER • When the vehicle is charged with an external power supply, it is normal that the cooling fan and A/C compressor may operate automatically in order for the power battery to heat up or cool down.
  • Page 87 Charge the vehicle when the battery temperature returns to a normal level. Verify that there is fault prompts for Vehicle or charging the charging pile or the vehicle, and pile failure it is recommended to contact a BYD authorized dealer or service provider.
  • Page 88 AC Vehicle Charge/Discharge Indicator • The charge/discharge indicator is located in the charging port hatch on the right side of the vehicle body to indicate charging status in green, yellow, red, blue, and white colors. • If the charging/discharging coupler is not connected, the indicator remains solid white for a period of time.
  • Page 89: Charging Method

    Charging time: Refer to the charging time message on the instrument cluster REMINDER or infotainment system. • It is recommended to contact a BYD authorized dealer or service WARNING provider or local electrician to select an appropriate power supply • For specific charging safety...
  • Page 90 REMINDER WARNING • Grounding instructions for the • To prevent the electrical charging charging device: The device port hatch from failing, do not open must be well grounded, and if and close it repeatedly. the charging device fails or is damaged, the ground cable can •...
  • Page 91 3. Stopping charging REMINDER • End the charging: • If the charging coupler cannot be removed after the unlocking • The charging automatically ends operation, try a few more unlocking when the vehicle is fully charged. attempts. If that does not work, try emergency unlocking.
  • Page 92 Charging with AC Charging Piles • The charging connection indicator on the instrument cluster lights up. 1. Device description • During charging, the instrument cluster displays relevant charging parameters • Single-phase AC charging box * and charging animation. • Use a standard-compliant 3.
  • Page 93 • Unlock the vehicle, and open the • Close the DC charging port cap and the charging port hatch and port cap. port hatch. • Connect the vehicle port: REMINDER • Plug the charging coupler to the • When the charging port cap is fully charging port in the vehicle and lock open, do not fully close the charging it securely.
  • Page 94 • The scheduled charging function is only developed for slow AC ② Charging time charging equipment supplied by BYD. Please disable this function ③ Repeat cycle when using slow AC charging equipment that is not certified ④ Settings by BYD. Otherwise, scheduled or...
  • Page 95 • When the Starter Iron Battery Manager • When the function is enabled, unlock detects that the charge level of the the vehicle and unplug the charging starter iron battery is too low, the starter coupler during charging in the following iron battery can be charged with the ways: power battery.
  • Page 96: Discharging Method

    REMINDER stop it immediately. • If the above functions are abnormal • Discharging safety warnings are the or fail, contact a BYD authorized same as charging safety warnings dealer or service provider. (refer to charging instructions).
  • Page 97: Driving Range Display

    • Ensure that there is no water or WARNING foreign material inside the charging port and that metal terminals are • Store the product in a cool dry place not damaged and free from rust or when not in use. corrosion.
  • Page 98: Battery

    Battery • For corresponding settings, tap on (infotainment system) → New Energy → Energy Management → Driving Range Display Mode. Power Battery • Standard mode: displays the driving range based on the result of • The vehicle is powered by a power comprehensive working condition battery that can be charged and test.
  • Page 99 SOC may on the cluster will light up. At this time, quickly jump to 100%. it is recommended to contact a BYD authorized dealer or service provider.
  • Page 100 fluid. If it comes into contact How to scrap an NEV: with skin or eyes, rinse immediately with plenty of water, and seek Take the vehicle to the BYD recycling immediate medical attention. service provider that will assess the residual value of the power battery.
  • Page 101: Iron Starter Battery

    Iron Starter Battery CAUTION! • Do not jump-start the vehicle with • Battery working modes include another fuel vehicle, as this may "Normal", "Sleep", "Ultra-low Power", damage the starter iron battery. "Low-Voltage Protection", etc. The purpose is to protect the battery cell •...
  • Page 102: Trailer Towing

    • Keep moderate speeds in motorways. The higher the speed, the higher the • BYD doesn't provide free warranty for consumption. the damage or faults resulted from towing for commercial purposes. 3. Reduce load: •...
  • Page 103: Carrying Luggage

    • Make sure the glove box is always closed REMINDER while driving. If the glove box is open, the occupant’s knees may be injured • Do not coast in neutral gear. in case of a collision or an emergency stop. Carrying Luggage REMINDER •...
  • Page 104: Fire Prevention

    If water enters high voltage systems, it out may cause a fire. may not fully dry out by any means. • It is recommended to go to a BYD • Vehicle safety and operating authorized dealer or service provider for performance will be seriously affected...
  • Page 105 • Improper refitting of electrical • Look for the ignition point. If the appliances or wiring may cause a cabin smokes, do not open the fire due to contact resistance and hood immediately. (This will let a abnormal heating. Fuses or other large amount of air in and cause replacement wires in excess of fire spreading.
  • Page 106: Starting And Driving

    Starting and • The electronic smart key is in the vehicle. Driving • Press and hold the smart key start button for over 15 seconds. Starting the Vehicle CAUTION! • Do not touch the power button In normal cases, start the vehicle as while driving.
  • Page 107: Safety Check Before Driving

    For higher your driving experiences. The vehicle can efficiency, do not accelerate or also be taken to a BYD authorized dealer or decelerate the vehicle unnecessarily. service provider for inspection. •...
  • Page 108 Gear Shift Controls Check after starting • Instrument cluster: Verify that maintenance indicator and • The gear position of the gear actuator is speedometer work properly. marked on the gearshift lever as shown on the right. • Brakes: In a safe area, drive the vehicle straight, hold the steering wheel tightly, •...
  • Page 109: Electronic Parking Brake (Epb)

    Electronic Parking Brake • Shifting out of "P" or to "D" gear requires pressing the brake pedal and the (EPB) UNLOCK button at the same time. For details, see the prompt message on the instrument cluster. EPB Switch • If the shift is successful, the lever returns to its middle position after it is released.
  • Page 110 Automatic "P" gear engagement CAUTION! • Depress the brake pedal to stop the • The "P" gear is the vehicle's parking vehicle and engage P gear. EPB is gear, meaning that the vehicle is engaged automatically. Do not release in a stable parking status, while the brake pedal until the indicator on EPB is the vehicle's main parking the cluster stops flashing and become...
  • Page 111: Automatic Vehicle Hold (Avh)

    If manual EPB release fails, press and activated, if there is a burning smell or hold the EPB switch for over 2 seconds. unusual noises are heard, contact a BYD If EPB can be released, drive the vehicle authorized dealer or service provider to the nearest repair shop to check immediately.
  • Page 112 • Press the AVH switch to enable AVH. CAUTION! A white indicator for AVH standby is displayed on the instrument cluster, and • Upon power-on, the AVH function is it turns green when AVH can be enabled. disabled by default. It enters stand- by mode, and the instrument cluster •...
  • Page 113 Low Speed Moving Conditions REMINDER • Do not leave the vehicle on "OK" • When the gear is shifted into "R” and ignition status. the vehicle moves slowly, AVH goes into low speed moving mode. When the • Remember to carry the smart key vehicle reverses (P gear) or travels (D when leaving the vehicle.
  • Page 114: Adaptive Cruise Control (Acc)

    Use anti-freeze washer fluid. multifunctional video controller to detect the relative distance and speed • These can be found in the BYD of a vehicle ahead, so as to control authorized dealer or service provider vehicle speed actively for automatic and the auto parts stores.
  • Page 115 • ACC activated: • The AEB function is not activated. Usage • The system is operational. It maintains the set speed or ACC activation/exit button automatically adjusts the distance from the vehicle ahead. At this • Press button ① to activate or exit ACC. time, the icon is displayed on (When activation conditions are met,...
  • Page 116: System Limitations

    • The system adjusts vehicle speed System Limitations to keep a suitable distance from the vehicle ahead on the same lane. You can • The radar is installed at the front area press buttons ② and ③ on the steering of the vehicle.
  • Page 117 • The ACC system can only achieve • If the distance between ACC vehicle limited braking instead of emergency and an adjacent lane is too small (or braking. a vehicle on an adjacent lane is too close to the ACC vehicle’s lane), ACC •...
  • Page 118 Longitudinal assistance, driven by the • In any of the following situations, ACC system, keeps the vehicle at a fixed it is recommended to go to a BYD speed or a fixed distance from the road authorized dealer or service provider for user ahead.
  • Page 119 • Brake pedal is depressed at speed 0; or • If lane lines ahead are clear and brake pedal is not depressed at speeds recognizable, transverse ICC control above 0. is activated automatically. In that case, ICC working status indicator •...
  • Page 120 Predictive Emergency PCW System Activation Conditions Braking (PEB)* and • All the following conditions must be Automatic Emergency met: Braking (AEB)* • The driver enables the function through HMI. • Pedestrian Collision Warning (PCW) • If the vehicle is approaching a system and Automatic Emergency moving target, vehicle speed is Braking(AEB) system detect vehicles and...
  • Page 121 System limitations Precautions • Detection may be affected or delayed • The PEB system cannot ensure zero in some environments. If the radar collision. In complex traffic, the system reflection cross-sectional area of cannot always clearly identify all the the target (a bicycle, three-wheelers, vehicles or pedestrians.
  • Page 122 Use of a small spare tire or tire repair functions will return after the sensor is kit. cleaned. • Make sure to go to a BYD authorized • As the pedestrian protection function is dealer or service provider for limited by certain physical conditions, professional calibration of the medium- the driver must take timely and effective...
  • Page 123 Front Cross Traffic Alert (FCTA)/ • The driver should ensure the normal operation of the FCTA/FCTB system, Front Cross Traffic Braking keeping radar sensors on both side (FCTB)* of the bumper in good condition. For example, dirt, snow or other obstructions covering sensors need to Front cross traffic alert (FCTA)/front cross be cleared right away.
  • Page 124 DiPilot → Driving Assist → TSR. The degrade system performance. In that system defaults to settings just before case, it is recommended to contact the last power-off when the vehicle a BYD authorized dealer or service starts. provider. • The speeding alarm threshold can be...
  • Page 125 • In case there is a collision or the Precautions camera sensor has been reassembled, it is recommended to go to a BYD • Given that ISLC integrates ACC and TSR, authorized dealer or service provider precautions on ACC and TSR must be for sensor calibration so as to avoid followed in the use of ISLC.
  • Page 126 Usage WARNING • ISLC only serves as a driving • To enable or disable HMA, go to assistance function, so the driver infotainment system, and tap DiPilot → must be fully responsible for driving Driving Assist. The system defaults to safety.
  • Page 127 In case there is a collision or the lane lines, the system, when activated, sensor has been reassembled, it slightly turns the steering wheel by is recommended to go to a BYD providing reverse torque through the authorized dealer or service provider electronic power steering (EPS) system for sensor calibration so as to avoid to prevent lane departure.
  • Page 128 Dirty or fogged windshield, or lights. The function returns once blocked multifunctional video conditions return to normal. If it does controller; not, it is recommended to contact a BYD authorized dealer or service provider. • Glaring from direct sunlight, reflection or oncoming vehicles;...
  • Page 129 • Partially or completely blocked • If ESA is disabled manually by pressing camera lens. buttons, a icon is displayed on the cluster. WARNING Precautions • LDA only serves as a driving • Situations where lane lines may not be assistance function, so the driver identified include but are not limited to: must be fully responsible for driving...
  • Page 130 Blind Spot Assist System* DOW* • DOW is realized with rear corner radars installed on both sides of the rear The blind spot assist system includes the bumper. When the vehicle is stationary following functions: blind spot detection with doors unlocked, the system (BSD), door open warning (DOW), rear keeps indicators on external rearview collision warning (RCW), and rear cross...
  • Page 131 • The driver should ensure the normal case, it is recommended to contact operation of the BSD system, keeping a BYD authorized dealer or service the BSD radar sensors in good provider. condition. For example, if they are covered in dirt, snow or other...
  • Page 132: Head-Up Display (Hud)

    Head-up Display (HUD) • Mode Setting: Used to select "Classic" (default setting) or "Snow" mode according to the service The head-up display (HUD) function environment of the vehicle. projects important information, including • Settings optional for display: Two vehicle speed, navigation, speed limit, ACC, types of settings are optional for lane departure, BSD, etc., into the driver’s display and are both turned on by...
  • Page 133 • When replacing wheel rims or spare tires* or performing tire rotations, the tire pressure system needs to be matched again. Please go to a BYD authorized dealer or service provider to re-match the tire pressure.
  • Page 134: System Function

    • When driving forward: WARNING • The broadcast volume increases • If the tire pressure is not normal, with increment of vehicle velocity the system will not prevent the that is at 0 km/h < V ≤ 20 km/h. vehicle from traveling. Therefore, each time before driving, the vehicle •...
  • Page 135: Panoramic View

    • Tap the radar icon in the contact a BYD authorized dealer or panoramic view to enable the radar service provider to deal with it. display, and tap it again to disable. When the radar display is enabled, an obstacle warning is displayed as it is approached.
  • Page 136 • Slowly tap the body image on the left WARNING to switch between visible and invisible body. • The distance to an object displayed on the panoramic view screen • After the vehicle starts, the image may be different from the distance before last power-off...
  • Page 137: Parking Assist

    Parking Assist ① Front right sensor ② Front center sensor Reversing Radar Power Switch ③ Front center sensor ④ Front left sensor You can enable or disable the reversing radar system with the reversing radar ⑤ Rear left Sensor switch or in (infotainment system) →...
  • Page 138 REMINDER About 0 Continuous to 300 • Parking assist system is designed to assist the driver in parking. It is not a substitute for personal judgment Working example of corner sensor and observation for maneuvering the vehicle. General Infotainment Alarm Distance •...
  • Page 139: Driving Safety

    If such issue persists, go to a BYD authorized dealer or service provider for inspection.
  • Page 140 Vehicle Dynamics Control(VDC) Hydraulic Brake Assit(HBA) When the vehicle turns suddenly while When the brake pedal is depressed quickly, driving, the VDC system judges the driver's HBA recognizes that the vehicle is in intention based on such information as emergency condition. It quickly increases steering wheel’s angle and vehicle speed, the brake pressure to the maximum, so and continuously compares with the actual...
  • Page 141 • To enable or disable the CST • Turning off ESC function, go to (infotainment • To turn off the ESC system, press system) → Vehicle settings → the physical button or tap Intelligent chassis → CST. (infotainment system) → DiPilot → •...
  • Page 142: Anti-Lock Braking System (Abs)

    fitted with different tires. • For details on tire or wheel replacement, it is recommended to contact a BYD authorized dealer or service provider. • Tire and suspension handling • Use of any defective tire or modified •...
  • Page 143 It is recommended to contact a BYD authorized dealer or service provider. • In this case, if brakes are applied, the ABS will not work and the vehicle will become extremely unstable.
  • Page 144: Interior Rearview Mirror

    Description Manual Adjustment of Interior Rearview Mirror* of Other Main Features Move the interior rearview mirror up or down, left or right to a suitable position. Interior Rearview Mirror Automatic Anti-glare Interior Rearview Mirror The automatic anti-glare interior rearview mirror is equipped with electronic anti- glare function, which automatically adjusts the lens color of the mirror according to the surroundings to reduce...
  • Page 145: External Rearview Mirrors

    External Rearview Mirrors Folding of External Rearview Mirrors External Rearview Mirrors Folding external rearview mirrors manually Using the switch for electric external rearview mirrors, the driver can adjust the Push the outer edge of the external mirrors to see the sides of the vehicle in the rearview mirror to rotate the mirror body mirrors.
  • Page 146: Snow Chains

    The wipers then rotate out • Before purchasing and installing snow automatically for easy maintenance and chains, consult a BYD authorized dealer replacement. or service provider where your vehicle was purchased. Pull up the wiper arm at the driver side, and then pull up the other at the •...
  • Page 147 REMINDER • For vehicles with snow chains, avoid sharp turns or braking with locked wheels, and slow down the vehicle before entering a curve to avoid accidents due to loss of control. • If abnormal noise is heard from the snow chain, it indicates that the chain may contact vehicle components such as suspension, body or brake lines.
  • Page 148 IN-VEHICLE DEVICES A/C System............ 148 Storage............157 Other In-Vehicle Devices......160 Infotainment System........164...
  • Page 149 A/C System • Tap this button again to disable automatic air recirculation when parking. Introduction to Air Auto A/C mode Conditioning • Two options are available: Economical and Comfort. • To access the A/C setting page, go to → Vehicle settings → A/C. A/C Panel Front-row A/C buttons ①...
  • Page 150 A/C Operation Interface Front-row A/C operation interface A/C setting Front windshield defrost Air purification system Internal/External circulation A/C operation interface button Ventilation A/C power button Front passenger A/C temperature adjustment Auto mode Driver A/C temperature adjustment Cooling mode Blowing mode Max.
  • Page 151 • If the odor persists after odor prevention methods are used, it is recommended to contact a BYD authorized dealer or service provider for repair. • In the front defrost mode, button operations on the rear control panel are invalid.
  • Page 152 REMINDER • In order to reduce odors from the A/C, if the A/C is already turned on, the A/C blower may keep running for a while after the vehicle is powered off and locked. That is because the condensed water on the surface of the evaporator needs to be dried to prevent mold fermentation.
  • Page 153 Defrost button for front windshield • to set it at position 1, and tap to set it at position 7. • Tap this button to activate the front windshield defrosting button indicator Blowing mod on the front A/C panel and enable the front windshield defroster control •...
  • Page 154 » Check, clean or replace the air filter regularly. » Keep the cabin clean. • If the unpleasant smell persists, contact a BYD authorized dealer or service provider for repair.
  • Page 155 Rear vent ①: Toggle the left vent stick to adjust the outlet angle of air flow. ②: Turn the roller to adjust the size of the vent or to open/close the vent. ③: Toggle the right vent stick to adjust the outlet angle of air flow.
  • Page 156: Air Purification System

    Air Purification System The air purification system purifies airborne PM2.5 particles. When A/C is turned on, the system thoroughly removes PM2.5 particles from the air blown into the cabin. Air purification operation interface Tap "Air purification" on the infotainment page. The PM2.5 operation interface is displayed. Air purification operation PM2.5 detection Outside PM2.5 value and level...
  • Page 157 PM2.5 detection button Tap "PM2.5 detection". When the button lights up, the system detects PM2.5 concentration inside/outside in real time and displays the real-time value on the pad. PM2.5 detection will stop if the button turns off. Quick purification button Tap this button to enable fast purification.
  • Page 158: Glove Box

    Storage Switching on A/C with Cloud Service App* Glove Box • A/C ON: On the BYD app control page, tap the "A/C ON" button, set • To use the glove box, unlock it with a "Set temperature", "Duration" and mechanical key and then pull the glove "Circulation mode", and enter the...
  • Page 159: Cubby Box

    Cubby Box REMINDER • The cup holder should hold a cup or To use the cubby box, press the switch on beverage can securely to avoid any the front of cubby box to open it. liquid spilling from the cup or can, damaging the front USB ports.
  • Page 160 Bill Box CAUTION! • Do not place an open cup or Tap the ticket box lid to open the box. untightened beverage bottle in the cup holder, so as to avoid liquid spillage when you are opening and closing the doors and driving. •...
  • Page 161: Sun Visor

    Other In-Vehicle Safety Handles Devices • ① Hook: Do not hang any heavy objects on the hook to avoid damage to the hook. Sun Visor • ② Safety handle: Pull the safety handle down for use. The handle returns to its ①...
  • Page 162: Auxiliary Power

    12V Auxiliary Power USB Ports • It is used for accessories with 12V DC USB charging ports can only be used when working voltage and no more than 10A the ignition switch is on OK. working current. • Only charging ports are provided under •...
  • Page 163: Sd Card Slot

    • Only USB charging ports are provided in • The wireless phone charging area is the rear-row armrest. located at the front of the cubby box. When the ignition switch is on OK, put the phone on the non-slip rubber pad in the wireless charging area with the phone screen facing up.
  • Page 164 • If a metal item is found between a BYD authorized dealer or service the device and the charger rubber provider. pad while charging, never remove it immediately with a bare hand to •...
  • Page 165: Infotainment System

    Infotainment WARNING System • Do not format or root the device without authorization, or it will cause the infotainment system or Infotainment Control the vehicle to malfunction. Panel • For driving safety, the use of landscape view is recommended while driving. Infotainment Control Panel Pad CAUTION! When the vehicle is powered on, the...
  • Page 166: Language Setting

    Widgets • When the infotainment system is started, the widget page is automatically displayed, which mainly contains: top status bar, Vehicle settings, A/C, navigation bar, and widget window. Language Setting • When the vehicle is powered on, tap → Dlink→More→Language the centre console touch screen and set the language as Simplified Chinese or English.
  • Page 168: Service And Maintenance

    SERVICE AND MAINTENANCE Instructions for Maintenance..... 168 Regular Maintenance........174 Self-Maintenance..........179...
  • Page 169: Instructions For Maintenance

    • It is recommended that the maintenance be performed in accordance with the standards and specifications of BYD Auto Co., Ltd., and by a local BYD authorized dealer or service provider...
  • Page 170: Maintenance Schedule

    Maintenance Schedule Vehicle maintenance is performed based on the mileages or months, whichever comes first. Maintenance Item Maintenance Cycle Inspections should be performed every Chassis fastening screw check 12 months or 20,000 km, where damaged parts should be replaced timely. The initial inspection should be performed at 12 months or 20,000 km, and subsequent inspections every 24...
  • Page 171 The initial inspection should be performed at 12 months or 20,000 km, and subsequent inspections every 24 Front and rear suspension check months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km. Check of tires and inflation Inspections should be performed every pressure, including Tire...
  • Page 172 Inspections should be performed every Check of vehicle module DTCs 12 months or 20,000 km, where damaged (to be cleared after recording) parts should be replaced timely. Inspections should be performed every Check of power battery tray, shield, 12 months or 20,000 km, where damaged impact bar, and mount point torque (QH) parts should be replaced timely.
  • Page 173 Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be PM2.5 quick tester filter* check replaced as necessary. Under harsh conditions, inspections should be performed every 6 months, where parts should be replaced when necessary. Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be...
  • Page 174 To keep the power battery in optimal conditions, it should be fully charged and discharged regularly (once every 6 months or 72,000 km, whichever comes first) for self-calibration. A BYD authorized dealer or service provider may also be contacted to carry out capacity testing and calibration.
  • Page 175: Regular Maintenance

    Therefore, you are this may result in serious vehicle recommended to send the vehicle damage and personal injury. to a BYD authorized dealer or service provider as soon as possible: Vehicle Corrosion • Motor start produces unusual noises.
  • Page 176: Exterior Cleaning

    BYD authorized dealer or service • Do not touch the paint with a greasy provider for repair. cloth. Do not place greasy tools or rub with organic solvents on the vehicle •...
  • Page 177 • Resin, bird droppings and insect REMINDER carcasses get stuck. • When cleaning the light assemblies, • Driving in areas with a large amount do not wipe the surface of the of smoke, soot, dust, iron filings or combination lights with chemical chemicals.
  • Page 178: Interior Cleaning

    Interior Cleaning Doors and Windows • Doors and windows can be cleaned with REMINDER any ordinary detergent. • Prevent direct water splashes • Check the door stops regularly. If the onto the dashboard or floor when stop lever is found with visible dust washing the vehicle, as these may accumulation, wipe it with a wet soft cause electrical faults.
  • Page 179 Do not wipe with a hard cloth or with acidic or alkaline cleaning products, • For any questions about vehicle which can damage the topcoat on the cleaning, please consult a local BYD white ash. authorized dealer or service provider. • Strictly prevents chemicals (perfume,...
  • Page 180: Self-Maintenance

    Self-Maintenance CAUTION! • As brake fluid can damage the skin Self-Maintenance or eyes, caution should be exercised while filling the brake fluid.If brake fluid splashes on skin or eyes, wash immediately with plenty water. If Self-Maintenance Precautions discomfort persists, seek medical attention.
  • Page 181 It is recommended to be due to high air humidity or have the headlights aligned by a BYD significant temperature difference authorized dealer or service provider. between the vehicle and its surroundings.
  • Page 182: Sunroof Maintenance

    Sunroof Maintenance • Clean the front of rear glass (with the front glass fully opened) frequently to avoid the accumulation of foreign • Wipe off dust or sand on the outer materials like dust, sand, and leaves, sealing strips of the sunroof with and prevent such debris from blocking a damp cloth to avoid scratches, drainage holes, which could result poor...
  • Page 183: Opening The Hood

    (preferably monthly). If the vehicle has been parked for a year or more, • Confirm that the hood is closed and go to a BYD authorized dealer or locked securely. Otherwise, while service provider for comprehensive driving, the hood may suddenly maintenance.
  • Page 184: Washer System

    A/C System if the braking system leaks and the brake friction blocks are worn. • The A/C system is a closed system, and any important maintenance work should be performed by professionals from a BYD authorized dealer or service provider.
  • Page 185: Maintenance Rules

    • Do not wash the blades directly with a water gun to prevent excessive water • If A/C efficiency decreases, go to a BYD pressure from damaging the blades. authorized dealer or service provider for maintenance. Maintenance Rules CAUTION! •...
  • Page 186: Tire Inflation

    Go to infotainment system and tap • The vehicle is equipped with a tire Vehicle health → Maintenance to pressure gauge. When tires are cold, enable front wiper maintenance. The you can decide whether to replenish tire wiper is rotated down. pressure according to the tire pressure values displayed on the instrument Grasp the upper end of the wiper arm...
  • Page 187: Tire Rotation

    • as shown. • If uneven tire wear is found, go to a BYD authorized dealer or service provider • ① Non-directional tires and wheels. and check the wheel alignment. •...
  • Page 188: Tire And Wheel Replacement

    Fuses • Go to a BYD authorized dealer or service provider for replacement of original tires. All vehicle circuits are provided with fuses to prevent short circuit or overloading.
  • Page 189 The dashboard PDB is located on the to check or replace the fuse at a left side of the dashboard. To access BYD authorized dealer or service the dashboard fuses, remove the lower provider. panel of the dashboard and then the left...
  • Page 190 Under-Hood PDB Nameplate Fuses Protected Ampere (A) Component or Circuit Dashboard PDB Charging and distribution assembly Left combination headlight...
  • Page 191 Protected Ampere (A) Component or Circuit Right combination headlight Battery manager Front motor controller Rear motor controller Brake light switch Rear windshield defroster Front wiper VTOV Electrically controlled cooling water pump 2 Electrically controlled cooling water pump Compressor Auxiliary power Rear-seat auxiliary power External amplifier External amplifier...
  • Page 192 Protected Ampere (A) Component or Circuit ADAS Instrument cluster Blower Integrated thermal management module ADAS 70/100 C-EPS/R-EPS Electric fan Battery...
  • Page 193 Dashboard PDB Nameplate Protected Ampere (A) Component or Circuit Rear body controller Left front window Right front window...
  • Page 194 Protected Ampere (A) Component or Circuit Gearshift panel Infotainment system Panel ambient light Combination switch Wireless charger Diagnostic port Instrument cluster Smart access Vehicle controller Left front electric seat Right front electric seat...
  • Page 195 Rear Compartment PDB Nameplate* Fuses Protected Ampere (A) Component or Circuit Left front pre- tensioner motor Right front pre- tensioner motor Left rear electric seat Right rear seat High-frequency reception module Suspension module Rear body controller Rear body controller...
  • Page 196 Protected Ampere (A) Component or Circuit Left combination tail light Right combination tail light External amplifier External amplifier ADAS External amplifier Left rear window Right rear window On-board charger UWB*...
  • Page 198 WHEN FAULTS OCCUR When Faults Occur........198...
  • Page 199 In that case, it is recommended to contact a BYD authorized service provider as soon as possible to change the battery, and you can start the vehicle in no-power mode.
  • Page 200 Once the emergency shutdown system is activated, the vehicle system cannot be switched into OK status. In that case, contact a BYD authorized dealer After a collision, if there is battery leakage, or service provider for help. Even if an acrid smell inside the vehicle, visible the ignition switch is set to the OK acid flow outside the vehicle, or any smoke...
  • Page 201: Towing Hook

    If any repair Towing Hook is required, it is recommended that you go to a BYD authorized dealer or service provider for repair. The installation point of vehicle towing hook is shown in the figure.
  • Page 202 In Case of a Flat Tire ① Warning triangle ② Reflective vest • In case of a flat tire, slow down, keep ③ Tire repair device* straight and move off the road to a safe place. ④ Rocker wrench* • Park on solid, flat ground and avoid ⑤...
  • Page 203 180 kPa (1.8 bar) within 10 immediately. minutes (red area shown in the figure), turn off the inflator. You • In case of an allergic reaction, seek are recommended to contact a medical attention immediately. BYD authorized dealer or service provider.
  • Page 204: Tire Replacement

    BYD authorized dealer or service • If the tire pressure is greater than provider. 220 kPa (2.2 bar), drive to the nearest service center at a speed below 80 km/h.
  • Page 205 REMINDER • Hold the end of the rocker wrench and press it down, and do not allow the rocker wrench to slide off the nut. • Do not remove the nut, just loosen it by one to two turns. Positioning the jack Loosening lug nuts Position the jack at the correct jacking point as shown.
  • Page 206 WARNING WARNING • Ensure that the jack is placed at the • When the jack is in contact with the correct jacking point. Raising the vehicle and begins to lift the vehicle, vehicle at an incorrect jack point verify again that the jack is in the will damage the vehicle or tip the correct position.
  • Page 207 WARNING CAUTION! • Do not apply motor oil or lubricant • Lug nuts must be torqued to 130 on bolts or nuts, as this can over- N•m after wheel replacement. tighten the nuts and thus damage Otherwise, loose nuts would cause the bolts.
  • Page 208: Vehicle Specifications

    VEHICLE SPECIFICATIONS Data Information.......... 208 Tips..............211...
  • Page 209: Data Information

    Data Information Vehicle Parameters Dimensions: Length * Width * Height (mm) (external rearview mirrors 4995*1910*1495 not included in width) Wheelbase (mm) 2920 Front track (mm) 1640 Rear track (mm) 1640 Front overhang (mm) Rear overhang (mm) 1100 Approach angle (°) Departure angle (°) Vehicle mass parameters: Curb weight (kg)
  • Page 210 Peak power/revolving speed/ Front: 180/15000/350 torque (kW/rpm/N•m) Rear: 200/15000/350 Vehicle power and economy: Max. design speed (km/h) Max. gradeability (%) ≥50%; Power consumption per 100 km under comprehensive 18.8 working conditions (kWh/100 km) Wheel and tires: Tire specifications 245/45/R19 Tire pressure (kPa) Wheel dynamic balance requirement (g) ≤10 Wheel alignment values (at curb weight):...
  • Page 211 Seats: Seat Item Parameter Front and rear seat positions set for front 30 mm forward from the seat (seat cushion farthest slide rail stroke depth measured) Seat back 26° forward Front seats and 40° backward from designed position, slide Normal service conditions rail 210 mm forward of front seats’...
  • Page 212: Vehicle Identification

    Tips VIN is engraved on the lower beam of the front passenger seat. Vehicle Identification ① Vehicle Identification Number(VIN) attached on the front of transmission assembly housing ② VIN attached on the side of the hood ③ VIN attached on the front windshield cross sill Note: The VIN can be read in the ④...
  • Page 213: Warning Labels

    • Peak power of drive motor Side airbag warning labels are attached below the left and right B-pillars. • Rated voltage of power battery system • Rated capacity of power battery system • • Maximum allowable total mass Model and Serial Number of Drive Motor ①...
  • Page 214 The tire pressure label is attached below the left B-pillar. The AC charging warning label is attached on the inside the cover of the AC charging port.
  • Page 215 Numbers Activating Emergency Shutdown System........198 12V Auxiliary Power....161 Buttons for External Rearview Mirror Adjustment......75 Airbag Triggering Conditions Basic Power Battery and Precautions......20 Description........97 Anti-theft System....... 31 Blind Spot Assist System..129 Anti-theft Indicator....31 Bill Box........159 Access Function......55 Brake fluid.........183 Adjust headlight height.....70 Anti-pinch Function....74...
  • Page 216 Emergency Rescue E-Call..79 Electric Lock Control of the Charging Port......94 Driver and Front Passenger Airbags......... 19 Emergency Unlocking of Charging Port......95 Data Collection and Processing........32 External Discharging Method*. 96 Disclosure of Personal Data to Energy Settings for Vehicle Authorities........34 Driving........106 Descriptions for Warning Lights...
  • Page 217 Fuse Location......187 Instructions for Break-in Period........100 Instructions for Trailer Towing........101 Greeting Function of Steering Instructions for Carrying Wheel*..........67 Luggage........102 General Charging Instructions for Vehicle Wading Troubleshooting......86 Into Water......... 102 Gear Shift Operation....107 Instructions for Driving... 112 Glove Box........
  • Page 218 Key Points for Driving in Manual EPB Release....109 Winter........112 Manually Adjusting the Interior Key Points for A/C Usage..152 Rearview Mirror......143 Maintenance Schedule Requirements......168 Maintenance Schedule... 169 LCD Instrument Cluster.... 36 Manual Car Washing....176 Locking/Unlocking with Maintenance Rules....184 Mechanical Key......
  • Page 219 Panoramic View Settings*..134 Smart Ambient Lights....80 Smart Charging Function..93 Paint Maintenance Tips..175 Saving Energy and Extending Vehicle Service Life....101 Starting the Vehicle from Raising/Lowering Windows with Inside......... 105 Smart Key........52 Safety Check Before Driving...106 Rolling Windows Up/Down with Sensor Type......136 Microswitch.........53 Switching on A/C with Cloud...
  • Page 220 Tire Replacement....203 Washer........183 Wiper Blades......184 Warning Label Location..212 Using Seat Belts......15 Unfastened Seat Belt Reminder Function........17 Your Data Protection Rights..34 USB Ports........161 Under-Hood PDB Nameplate 189 Vehicle Data Processing....32 Vehicle AC Charge/Discharge Indicator........87 Vents..........
  • Page 221: Abbreviation List

    Abbreviation List Abbreviations Abbreviations Full Form Abbreviations Full Form Electronic Control Unit Anti-lock Braking System AUTO Automatic Adaptive Cruise Control Universal Serial Bus Economic NORMAL Normal SPORT Sport State of Charge Automatic Vehicle Hold Predictive Electric Parking Brake Collision Warning Autonomous Blind Spot Emergency Braking...

Table of Contents