Fishman LOUDBOX MINI User Manual page 7

Getting Started
Your new Loudbox Mini is a portable amplifier designed to faithfully reproduce
the sound of acoustic instruments and a diverse assortment of vocal or recorded
accompaniments.
With the addition of Bluetooth
backing tracks or other accompaniment to your performances.
Here are some basic setup tips to help get you going. To operate your Loudbox
Mini safely, please read the entire manual, especially the Important Safety
Instructions on page 2.
1. Locate the Power switch (next to the rear panel power cord terminal) and
switch it off, then connect the power cord.
2. Plug the Loudbox Mini into an electrical outlet with the appropriate AC voltage.
3. Turn down the Master Volume control and turn on the Power switch. The
Power Indicator should illuminate.
4. Connect your instrument to the Instrument input with a shielded ¼" cable.
5. Gradually increase the Instrument channel Gain:
• For instruments featuring active (battery-powered) onboard preamps,
start with the control around 10 o'clock.
• For passive pickups, you may start with the control set much higher.
It is normal to run this control near its maximum with many passive
soundhole pickups.
6. Slowly raise the Master Volume to the desired level.
Instrument Gain Low
Phase
wireless connectivity, you can now easily add
®
Mid High Reverb Chorus
mild
off
7
Gain Low
heavy
Mic
pairing
High Reverb Master
power