CDN ProAccurate SD1502 Manual

Features
• NSF® Certified
• Tare function
• Backlit display
• Data hold
• Tempered glass
• Selectable units
• Overload indication
• Battery status indication
• On/off button
• Auto-off after 5 minutes
• Platform Size: 6.02 W x 9.17 H (in)/
15.3 W x 23.3 H (cm)
• Resolution: 0.1 oz, 1 g
• 3V CR2032 lithium batteries (included)
Note: Clean the scale before each use.
Important: DO NOT IMMERSE IN LIQUID.
Digital Glass Scale
Note: In the following instructions, names of the
control buttons are shown in CAPS. Function
information that appears on the display is shown in
BOLD CAPS.
Battery Installation
Replace batteries when LCD becomes dim. bAtt
appears on the display for 2 seconds before turning
off when the batteries need to be replaced.
1. Power off the unit before installing the batteries.
2. Remove battery cover on the back by pressing
the latch in and lifting up.
3. Install two CR2032 Lithium batteries with
positive (+) side up.
4. Replace the battery cover until it clicks shut.
Operating Instructions
Place the scale gently on a hard and flat surface and
make sure it is steady before use to obtain accurate
measurements.
A. On/Off
1. Press the ON/TARE button to turn on. The display
flashes ––– and then returns to zero.
2. Press the ON/TARE button for 2 seconds
to turn off.
B. Auto Off
The scale automatically turns off after 5 minutes
of inactivity.
C. Backlit Display
The display is backlit for the first 10 seconds of use
to conserve battery life. The display backlights
for 10 seconds each time the scale is pressed or
an item is placed on the scale.
D. Unit Selection
1. Press the UNIT/HOLD button to select the
desired unit. The display switches between oz
and g.
2. oz appears on the display when the weight is less
than 1 lb. Otherwise, both lb and oz appear on
the display.
3. g appears on the display when the weight is less
than 1 kg. Otherwise, kg appears on the display.
Model: SD1502
ProAccurate
15 pounds/7 kilograms
by pounds:ounces and grams