CDN SD1110 User Manual

Features
• Submersible
• Programmable
• Tare function
• Backlit display
• Field calibration
• Low/high limit alerts
• Stainless steel housing
• Removable stainless steel platform
• Rechargeable battery
• Power adapter
• Stability indication
• Selectable units
• Overload indication
• Battery status indication
• On/off button
• Auto-off after 2 minutes
Portion Control Scale
11 pounds/5 kilograms/176 ounces
by pounds:ounces, ounces, fractional ounces and grams
Note:
In the following instructions, names of the control
buttons are shown in CAPS. Function information that
appears on the display is shown in BOLD CAPS.

Charging the Battery

The LOW BATTERY icon ( ) appears on the display
when battery status is low and needs to be charged.
The battery is built-in and does not need to be
replaced.
1. Insert the adapter plug into the jack on the back
of the scale. Allow the scale to charge for 5 hours.
The scale will then operate continuously for
approximately 14 hours

Operating Instructions

Place the scale gently on a hard and flat surface and
make sure it is steady before use to obtain accurate
measurements.
A. On/Off
1. Press the POWER button ( ) to turn on. The display
flashes all segments and then returns to zero.
2. The STABILITY icon ( ) appears in the lower left
corner of the display when the weight is stable.
3. Press the POWER button ( ) to turn off.
B. Auto Off
The scale automatically turns off after 2 minutes
of inactivity.
C. Backlit Display
Press and hold the UNIT button for 3 seconds to
turn the backlit display on and off.
D. Unit Selection
1. Press the UNIT button to select the desired unit.
The display cycles through g, lb:oz, lb:/oz, lb, oz,
and /oz,
2. Press the SET button to confirm and return to
weighing mode.
Model: SD1110
Rechargeable