Connecting To External Components; Connecting The Fm And Am(Mw) Antennas - Samsung MM-DT8 Instruction Manual

Connecting to External
Components
Connecting to an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
RADIO ANTENNA
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX to select AUX.
•
' AUX' appears in the display.
11
R
L
Audio Cable
If the external analog
component has only one Audio
Out, connect either left or right.
Connecting the FM and
AM(MW) Antennas
AM Loop Antenna
(supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
If FM reception is poor,
connect an outdoor FM
antenna (not supplied).
RADIO ANTENNA
FM Antenna (supplied)
AM antenna connection
(MW)
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
12