NOTE: When using the delay time feature, foods
more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful
heat from the bulb will speed harmful bacteria
growth
10. Probe: Monitors internal food temperature and
programmed temperature. Insert the probe,
program the cooking mode, and program the
probe temperature. See the Cooking Modes
section for more information. The probe can only
be used with Traditional Bake, Convection Bake
1 Rack, and Convection Roast.
11. Oven Light(s)
12. Remote Enable (on some models):
CONNECTING YOUR OVEN
: Oven is not connected. Open the app then
select Remote Enable to begin the connecting
process.
: Oven is in discovery mode and
looking for a network.
: An error occurred during the
connecting process.
Solid: Oven is connected to the network and can
be remotely controlled by a connected mobile
device when in operation, but it cannot be
started remotely.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely, select
Remote Enable and the REMOTE icon will turn
on in the display. The oven can now be remotely
started with a connected device. Opening an
REMOTE icon. The REMOTE icon must be lit to
start the oven remotely. The REMOTE icon is not
required to change the oven settings or to turn
verify that the REMOTE icon is lit if you wish to
start the oven remotely in the future.
13. Lock Controls: Locks out the control so that
pressing the pads does not activate the controls.
Press and hold the Oven Lights and Timer pads
at the same time for three seconds to lock or
unlock the control.
REMOTE
– 16 –
Need help?
Do you have a question about the Monogram ZET1F and is the answer not in the manual?