Xerox WorkCentre 6515 Manual

Printer Tour

Jam Access

www.xerox.com/office/WC6515supplies
For ordering supplies, contact your local reseller, or visit the Xerox® Supplies website.

Control Panel

1. Log in for special access and customizing your experience.
2. NFC Area allows pairing with a mobile device to print or scan from an app.
3. Reset clears settings for all apps.
4. The Device app provides access to printer information and settings.
5. Home returns to the main app screen.
6. Power/Wake
7. Status LED indicates printer status. For detailed information, refer to the User Guide.

Embedded Web Server

The Xerox^® Embedded Web Server enables you to access printer configuration details, paper and supplies status, job status, and diagnostic functions over a network. You can also manage fax, email, and address books. For details on using the Embedded Web Server, refer to the User Guide located on Xerox.com.

To connect, in a Web browser, type the printer IP address. The network IPv4 address is available on the control panel touch screen. Touch Device app > About, then scroll down.

Supported Paper

1. 60–220 g/m2 (16 lb. Bond–80 lb. Cover)
   4 x 6: 4 x 6 in.
   5 x 7 : 5 x 7 in.
   Statement*: 5.5 x 8.5 in.
   Executive* : 7.25 x 10.5 in.
   8 x 10*: 8 x 10 in.
   Letter* : 8.5 x 11 in.
   Folio* : 8.5 x 13 in.
   Legal* : 8.5 x 14 in.
   A6: 105 x 148 mm
   A5* : 148 x 210 mm
   A4* : 210 x 297 mm
   215 x 315* : 215 x 315 mm
   Monarch : 3.9 x 7.5 in.
   #10: 4.12 x 9.5 in.
   DL : 110 x 220 mm
   C6 : 114 x 162 mm
2. 60–220 g/m2
   (16 lb. Bond–80 lb. Cover)
   Executive* : 7.25 x 10.5 in.
   Letter* : 8.5 x 11 in.
   Folio* : 8.5 x 13 in.
   Legal* : 8.5 x 14 in.
   A5* : 148 x 210 mm
   A4* : 210 x 297 mm

* 6515 DN/DNI 60–176 g/m 2 (16 lb. Bond–65 lb. Cover)

60–80 g/m 2 (16–20 lb. Bond)
Recycled

177–220 g/m 2 (65–80 lb. Cover)
Cardstock
Glossy Cardstock

60–90 g/m 2 (20–24 lb. Bond)
Custom 1

75–105 g/m 2 (20–28 lb. Bond)
Plain

Basic Printing

At the printer control panel, change size and type settings. In the Xerox^® print driver, select printing options.

Printing from a USB Flash Drive

1. Touch USB or insert your USB Flash Drive, then choose Print from USB.
   
2. Touch Add Document, then navigate to your files and select them.
   
3. To select the number of copies, touch + or -. For larger numbers, touch Quantity and enter a number
   
4. If more documents are needed, touch Add Document. Select settings as desired, then touch Print.
   

Printing Jobs Stored on the Printer

1. You can send a print job to save to the printer, then select the job from the printer control panel to print at a later time. Jobs can be saved in the public folder or be password protected. In the Xerox^® printer driver, select Properties (Windows) or Xerox Features (Mac OS), then Job Type. Select Saved Job or Secure Print. For Secure Print, type a passcode.
   
2. To print stored jobs from the control panel, touch Jobs, then touch Saved Jobs or Personal & Secure Jobs. Select the folder or job.
   
3. If requested, type the password. Select the quantity. To print the job, touch OK. To delete the job, touch the trash icon, then touch Delete.
   

Basic Copying

1. Load the original images.
   
   
2. Touch Copy and select the number of copies desired.
   
3. Select settings from the list, then touch Start.
   
4. Note: Settings from previous users remain for a short time. To clear the temporary settings in all apps, on the Home screen, touch Reset.
   

Scanning

The printer is connected typically to a network rather than a single computer. You select a destination for the scanned image at the printer. Some methods are available to anyone. Other methods require network access or prepared destinations. This guide covers several methods and focuses on key advantages of each. For detailed procedures and more scanning options, refer to the User Guide.

Load original images on the document glass or in the document feeder.

Using the Scan To App

1. Scan To offers a variety of scan destinations to choose from and allows you to send to multiple destinations not accessible to single-purpose apps such as scanning to Email or USB. Touch Scan To then choose your first destination.
   To prepare destinations, refer to the User Guide.
   
2. To include more destinations of any available type, touch Add Destination. For a menu to remove a destination or add it to the address book, touch the destination.
   
3. Choose the file type and other scan settings. To edit the default scan name, touch the name, and type the changes. Touch Scan.
   

Scanning to a USB Flash Drive

1. Scan to USB is a simple way to acquire a scan if you do not have prepared destinations or network access. Touch USB or insert your USB Flash Drive, then choose Scan to USB.
   
2. Touch Switch Destination, then navigate to your preferred destination.
   
3. Choose the file type and other scan settings. To edit the default scan name, touch the name, and type the changes. Touch Scan.
   

Scanning to Email

1. The Email app offers a variety of controls for sending scanned images in emails. Touch Email, then touch To and type an address. To add more recipients, touch the address field again. For details about email and address book features, refer to the User Guide.
   
2. To add stored addresses to the email, touch the address book button. For a menu to remove an address or add it to the address book, touch the address. To create a subject line, touch the subject line.
   
3. Choose the file type and other scan settings. From, Reply To, and Message settings are at the bottom of the list. To edit the default scan name, touch the name, then type the desired name. Touch Send.
   

Scanning to a Default Folder

1. You can set up a scan-to folder on the network or online. To create a location, touch Device > Apps > Scan To then choose Network or FTP. Enter the FTP settings. To select a folder on the network or online, navigate to the desired location.
   
2. To scan to your prepared network location, touch Scan To... and choose Network. Select a subfolder as needed.
   
3. Choose the file type and other scan settings. To edit the default scan name, touch the name, and type the changes. Touch Scan.
   

Faxing

You can enter fax numbers manually and store them in the address book, or select fax numbers from the address book. For information about fax settings and managing stored fax numbers in the address book, refer to the User Guide.

Load original images on the document glass or in the document feeder.

Basic Faxing

1. Touch Fax, then touch Destination and type a fax number. To add stored numbers, touch the address book. To add more recipients, touch the destination field again.
   
2. To add, edit or remove a number from the address book, touch and hold the number and select an option.
   
3. Choose fax settings as desired, then touch Send.
   

Paper Jams

When a jam occurs, the control panel displays graphics showing how to clear the jam.

Jam Access