Advertisement
Connect the unit and the computer booted using the micro-USB cable supplied.
When the unit and the computer are connected, charging starts and the indicator (red) lights up. Charging is completed in about 2.5 hours at most and the indicator (red) goes off automatically.
Use the micro-USB cable supplied. You may not be able to charge the unit with other cables.
Refer to the "Pairing and connecting with the BLUETOOTH device" section to connect to a BLUETOOTH device that is not compatible with the one-touch connection (NFC function).
NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.
By using the NFC function, the unit is turned on automatically and then paired and connected with a BLUETOOTH device.
Compatible smartphones
Preparation on the smartphone
Connecting with the smartphone by one-touch functions
By touching the unit with the smartphone, the unit is turned on automatically and then proceeds to pairing and BLUETOOTH connection.
Operate the unit after making BLUETOOTH connection with your BLUETOOTH device.
Listening to music
Profile: A2DP, AVRCP
Start playback on the BLUETOOTH device.
Play/pause: Press .
Stop: Hold down.
Next/previous: Press .
Fast forward/fast reverse: Hold down.
Note
The available functions may vary depending on the BLUETOOTH device. When you operate the button illustrated above, it may operate differently or may not work at all.
The sound quality is set to the standard mode (SBC high quality mode) before shipment. When you connect a BLUETOOTH device compatible with AAC or aptX, you can change the setting as described in the Help Guide to enjoy music playback at a higher level of sound quality.
Making a call/Receiving a call
Profile: HSP, HFP
Pperate your mobile phone to make a call.
Press the button on the unit when an incoming call arrives.
Operate in the same way when an incoming call arrives while you are listening to the music. The music playback pauses during a call and resumes automatically when the call is over.
Note Music playback may not resume automatically with some BLUETOOTH devices.
To terminate a call, press the button on the unit again.
Volume for a call and listening to music can be adjusted independently.
Before pairing, charge this unit.
Connecting with the paired device
Using the unit by connecting the supplied cord
You can use the unit as ordinary wired headphones by connecting the supplied cord.
Notes
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the MDR-10RBT and is the answer not in the manual?
Questions and answers