Mirror Image - SATO M-8400RVe Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO M8400RVe

Mirror Image

<ESC>RM
Example: <ESC>A1<ESC>RM
Placement: After fields to be mirrored
Default: None
To allow mirror image printing of data, such as on transparent labels
to be applied to a glass or other transparent surface.
<ESC>A
<ESC>A108321424
<ESC>H0100<ESC>V0050<ESC>XL0ABCDEF
<ESC>RM
<ESC>Q1<ESC>Z
1. The <ESC>A1 Media Size command must precede this
command. The image area specified by the Media Size command
will be mirrored. In the example above, The <ESC>A108321424
specifies a label 832 dots wide by 1424 dots long.
2. This command can be used with the <ESC>% Rotate Fixed Base
Reference Point command. Please note that the reference point
rotation is dependent upon the location of the <ESC>% command
in the data stream
3. This command should not be specified more than once in any
single job.
4. This command cannot be used with commands requiring
re-editing of the print area, such as Sequential Numbering, Real
time clock or Copy Image Area.
PN 9001075A
Section 5: Programming Reference
Page 5-57