Stereo Link - Roland S-4000S Owner's Manual

Stereo Link

The Stereo Link function allows you to link odd/even adjacent S-4000S input channel pairs (1/2, 3/4,
etc.). When channels are linked, gain and pad settings made on one channel of the linked pair will be
duplicated on the other. This can be convenient when audio devices with stereo outputs are connected
to the S-4000S.
With the S-4000R unlocked, use the following procedure to link a pair of channels:
1. Using the CHANNEL knob, select one channel of the pair that you wish to link together. For
example, if you wish to link Channels 7 and 8, choose either "07" or "08".
2. While holding CLIP CLEAR•ENTER, turn the CHANNEL knob clockwise.
3. Release CLIP CLEAR•ENTER.
When channels are linked, their channel numbers are displayed with two periods (.), as shown in the
following examples:
������������������������
With the S-4000R unlocked, use the following procedure to unlink a channel pair:
1. Using the CHANNEL knob, select one channel of the linked pair that you wish to unlink.
2. While holding CLIP CLEAR•ENTER, turn the CHANNEL knob counterclockwise.
3. Release CLIP CLEAR•ENTER.
Stereo Link Notes
• Only odd/even adjacent pairs can be linked (1/2, 3/4, etc.).
• When a channel pair is linked, the current gain and pad settings of the odd-numbered channel
will be copied to the even-numbered channel.
• When a channel pair is unlinked, each channel's gain and pad settings will remain in the same
state as when they were linked.
• While channels are linked, their phantom power status can still be set independently.
• S-4000H inputs (33-40) cannot be linked.
S-4000 Digital Snake Owner's Manual
6—Using the S-4000 System
��������������������������
69