Roland S-4000S Owner's Manual page 30

4— Panel Descriptions
4—CLIP CLEAR•ENTER Button
The CLIP CLEAR•ENTER button is a dual-function button. It's used to:
• clear the clip indicators—When an input signal connected to one of the system's audio inputs
exceeds 0 dB (in the digital domain), the corresponding clip indicators on the S-4000R light, and
the CLIP CLEAR•ENTER button flashes. To turn off all clip lights, press CLIP CLEAR•ENTER so that
it stops flashing.
• finalize a selection—When a selection is made (such as a memory preset), press CLIP CLEAR•ENTER
to finalize the selection.
5—PAD Button
Press the PAD button so its indicator lights to engage a 20 dB pad on the currently selected input
channel.
To disengage the pad, select the desired channel and press the PAD button so its indicator goes out.
6—PHANTOM +48 V Button
Each S-4000S input channel can provide +48 V phantom power to connected devices that require it
(such as condenser microphones and active direct boxes).
Press the PHANTOM +48 V button so its indicator lights to turn on phantom power on the currently
selected input channel.
To turn off phantom power, select the desired channel and press PHANTOM +48 V so its indicator
goes out.
Always turn the phantom power off when connecting any device other than condenser
microphones that require phantom power. You risk causing damage if you mistakenly supply
phantom power to dynamic microphones, audio playback devices, or other devices that don't
require such power. Be sure to check the specifications of any microphone you intend to use
by referring to the manual that came with it. (This instrument's phantom power: 48 V DC, 14
mA Max.)
7—GAIN Knob
Use this knob to set the preamp gain for the currently selected S-4000S input channel. Indicator lights
surrounding the GAIN knob show the current gain setting.
Each S-4000S input channel's gain range is -45 to +10 dBu with the pad on, and -65 to -10 dBu with
the pad off.
8—Input Signal Level Meter
This eight-segment LED meter indicates signal level for the currently selected input channel.
30 S-4000 Digital Snake Owner's Manual