Turning On/Off The Br-1600Cd; Turning On The Br-1600Cd - Boss BR-1600CD Basic Operation Gude

Turning on/off the BR-1600CD

Turning on the BR-1600CD

Use the POWER switch to turn the BR-1600CD on and off.
Once the connections have been completed (
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
fig.07-02
1
Before turning on the power, the
volume of all connected devices should
be turned all the way down.
2
Loop the AC adaptor's cord around the
cord hook and connect its plug to the
BR-1600CD's DC IN jack.
This will ensure that, even when the cord is accidentally
pulled, the power will not turn off as a result of the plug
being pulled out of the DC IN jack, and the jack itself
will not be subjected to excessive force.
fig.07-03
3
Plug the AC adaptor into a power outlet.
IMPORTANT
• A small amount of noise may be output from the BR-1600CD when it is turned on. Although this noise is neither loud
nor the result of a malfunction, it can cause speakers and other similar devices to be damaged if the amplifier volume
is turned up at this time. It is important, therefore, to ensure that the amplifier is turned on last of all.
• In order to protect the BR-1600CD's circuits, no operation will be possible for a short period of time after the power is
turned on.
8
p. 6
), turn on power to your various devices in the order specified. By turning on
4
5
fig.07-04d
6
POWER Switch
If any CD players, keyboards, etc. are
connected to the BR-1600CD's input
jacks, turn on these devices first.
Press the BR-1600CD's POWER switch.
The power will turn on and the opening screen will be
displayed. After a few moments, the message "Now
Checking..." will appear, and this will be followed by the
message "Now Loading...". When the top screen
appears, it indicates that the BR-1600CD is ready for use.
If an amplifier or any other similar device
is connected to the BR-1600CD's output,
this should be turned on last of all.