Adjusting The Volume - Boss BR-1600CD Basic Operation Gude

Adjusting the volume

fig.07-09a
1
Move the MASTER fader up and down
while the song is being played.
The overall volume changes in response to the
position of this fader. The display on the MIX level
meter changes in response to the volume.
In certain cases, distortion will occur when a fader is raised too high. In particular, this occurs when the corresponding
level meter rises beyond the 0 dB point. In such a case, lower the fader until the distortion is no longer present.
Basic operation of the recorder
2 1
2
Move the Track faders for each track
up and down.
The volume of each track changes in response to the
position of the corresponding fader. In addition, the
display on each track's level meter changes in
response to its volume.
13