Basic operation of the recorder
Changing the current position
The current position within a song can be moved regardless of whether or not the song is being played. Any one of a
number of different methods can be used to change the current position.
• When the current position is changed, it takes a bit of time before you can carry out the next operation. This time is
necessary for reading of data from the hard disk that will be needed for playback at the new song position.
• It is not possible to change the current position while recording.
Using the transport buttons
The song position can be changed using the transport buttons located on the bottom left of the front panel.
fig.07-09b
2
3
1
5
1
Press [ZERO].
Moves you to the time location 00:00:00-00.00.
2
Press [FF].
The current position will move forward by one
second.
3
Press [REW].
The current position will move back by one second.
14
4
4
5
Hold down [STOP] and press [FF].
After the BR-1600CD has checked the V-Tracks
currently selected for each track, the current position
will jump to the point in the song at which the last
recording was made.
Hold down [STOP] and press [REW].
After the BR-1600CD has checked the V-Tracks
currently selected for each track, the current position
will jump to the point in the song at which the first
recording was made.