Adjusting volume and compression for CD writing (Mastering Tool Kit)
Mastering
fig.07-56b
1,6
5
1
Move the current position back to the
beginning of the song.
2
Use [CURSOR] and the TIME/VALUE
dial to choose the V-Tracks to be used as
the source and destination of mastering.
fig.07-56fd
The source V-Track
3
Press [REC].
[REC] will turn red and start to flash, indicating that
the BR-1600CD is now ready for recording.
4
Press [PLAY].
Both [PLAY] and [REC] will light up and mastering
will begin.
60
4,6 3
The destination V-Track
5
When you reach the end of the song,
press [STOP].
Both [PLAY] and [REC] will turn off and mastering
will stop.
When mastering has been completed, the current V-
Track used as source will automatically switch to the
V-Track that you chose as the destination for
mastering. In addition, the BR-1600CD will also turn
off the Mastering Tool Kit (the [MASTERING TOOL
KIT] indicator goes out) to prevent the mastered track
from passing through the kit a second time.
6
Start playback from the beginning of
the song and listen to the mastered
track.
If you are not happy with the results of mastering,
press [UNDO/REDO] to cancel the recording that
you have just made. ("Undo" (p. 42))
7
If you wish to store the mastered track,
save the current song (p. 56).
2
2