Count-Down Setting; Sounding A Count Before The Melody Begins (Countdown); Selecting The Part That Will Begin The Count-Down (Countdown Part) - Roland F-110 Owner's Manual

4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
The volume of the Key Off sound decreases
as the value is lowered, while raising the
value increases the volume of the Key Off
OFF, 1–10
sound.
The Key Off Resonance function is not active
when the value is set to "OFF."
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.

Count-down Setting

Sounding a Count Before the Melody
Begins (Countdown)
A "count-down" is when a count is sounded at the end of the
song's introduction (before you begin playing the keyboard).
If you will be playing along with the song, sounding a count
will help you match the timing of your playing with the song.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Metronome] button and use
the [–] or [+] button to select "Ctd."
3.
Release the [Metronome] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
A count is sounded
A count is not sounded
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Selecting the Part that Will Begin the
Count-down (Countdown Part)
Specifies the part that will determine the beginning of the
performance when adding a count-down.
The count will sound before the selected part begins playing.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Metronome] button and use
the [–] or [+] button to select "Cd.P."
3.
Release the [Metronome] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
Right-hand and left-hand parts of a song
Left-hand part of a song
Right-hand part of a song
1–16 Part 1–16
When you select another song, this setting will return to
"r - L."
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Various Settings
55