Adding Reverberation To Sounds (Reverb Effect); Changing The Depth Of The Reverb Effect - Roland F-110 Owner's Manual

Message Description
This sets the standard keyboard touch. You can
play with the most natural touch. This is the
closest to the touch of an acoustic piano.
Medium
You have to finger the keyboard more forcefully
than "medium" in order to play fortissimo (ff), so
the keyboard touch feels heavier. Dynamic
fingering adds even more feeling to what you
Heavy
play.
This setting produces the heaviest keyboard
touch.
Super Heavy
3.
Release the [Transpose] and [Shift] buttons.
You can use the Memory Backup function to store this
setting in internal memory (p. 59).
Adding Reverberation to
Sounds (Reverb Effect)
You can apply a reverb effect to the notes you play on the
keyboard. With the reverb effect, you obtain a pleasant
reverberation, making it sound as if you were performing in a
concert hall or similar space.
fig.Reverb.eps_88
1.
Press the [Reverb] button so it's lit.
(If you haven't pressed this button since switching on the
F-110, its indicator will already be lit, so there is no need to
press it.)
Play a few notes on the keyboard. The reverb effect is applied
to the entire tone.
Turning Off the Reverb Effect
1.
Press the [Reverb] button so its light is turned off.
Reverb will not be applied if Twin Piano is turned on
with Twin Piano Mode "2" selected.
Changing the Depth of the Reverb
Effect
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [–] or
[+] button.
The depth for the reverb effect appears in the display.
fig.d-4.eps_88
You can use the Memory Backup function to store this
setting in internal memory (p. 59).
You cannot make separate reverb effect depth settings
for each individual tone.
The effect will be applied with the same depth to all
tones.
This will not change the reverb depth for the song that
is playing back.
Performing
25