Recording; Recording Your Keyboard Performance - Roland F-110 Owner's Manual

Recording

You can easily record your performances.
You can play back a performance you have recorded to check
what and how you played, and play melodies on the
keyboard along with prerecorded accompaniment.
You can perform the following types of recording.
• Recording just your own keyboard performance: p. 36
• Selecting a track button and recording: p. 37
• Re-recording: p. 37
• Recording along with an internal song: p. 39
With second or later recordings, the previously recorded
song is erased as the new material is recorded. When
recording a new performance, it is probably a good idea
to erase the previously recorded performance first
(p. 40).
fig.OverRec.eps_88
1st Pass
2nd Pass
When the following appears in the display
If you have recorded a song but have not yet saved it,
"dEL" will appear, blinking, when you select another
song.
fig.d-dEL.eps_88
You cannot record another song or carry out playback if
memory contains an unsaved song.
If it is OK to delete the song, press the [
If you don't want to delete the song, press the [
button and save your song to internal memory.
36
The first Performance
is preserved
] button.
]
Recording Your Keyboard
Performance
Here's how to record just your own keyboard performance
without using an internal song.
fig.RecordButtonz-i.eps_88
Performance Settings
1.
Press the [Song] button a number of times until the
indication "USr" (or a number preceded by a "P" or
"U") is displayed.
If the display shows something like "P.01," "U.01" (or any
other value after the "P" or "U."), press the [–] button until the
following indication appears.
fig.d-USr.eps_88
Alternatively, you can get "USr" to be displayed by
holding down the [Song] button and pressing the [
button.
2.
Select the Tone to be played (p. 24).
3.
If necessary, sound the metronome.
Press the [Metronome] button (p. 30).
While listening to the metronome, adjust the song tempo
and the time signature as desired (p. 30).
Settings for Recording
4.
Press the [ ] button.
The [ ] button lights, the [
and the F-110 is put into recording standby mode.
If you decide not to record, press the [
again.
]
] button begins flashing,
] button once