Ricoh Aficio CL3000 Maintenance Manual page 378

Display
Shows the SNMP information and available protocols.
msh> snmp ?
msh> snmp [-p] [registered_number]
Note
If the -p option is added, you can view the settings one by one.
Omitting the number displays all access settings.
Community name configuration
You can set the community name of the Network Interface Board.
msh> snmp number name community_name
Note
The community name must be within 15 characters.
Access type configuration
You can select the access type from those listed below.
msh> snmp number type access_type
Access type Type of access which is permitted
read Read only
write Read and write
trap User is notified of trap messages.
no All access is denied.
Operating Instructions Administrator Reference
192