Scosche MAGICMOUNT MAG12V, MAG12VI - Power Socket Mount Manual

PARTS INCLUDED

(1) Magnetic mount with flexible neck and 7.5w USB charging port

(1) Small metal plate

(1) Large metal plate

READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS MOUNT KIT.

Use caution whenever removing or handling plastic parts of any vehicle. Unnecessary force or pressure can cause pieces to crack or break. Please use a plastic card to remove the metal plates. Remove adhesive residue with a non-abrasive cleaner.

MOUNTING THE METAL PLATE

Note: This item is not to be used with any Qi Wireless Charging products as the metal plates can cause extreme heat that can cause burns and/or damage the device.

OPTION 1 (small or large plate): Attach adhesive side of metal plate directly to back of device.

OPTION 2 (small or large plate): Attach adhesive side of metal plate directly to back of case.

OPTION 3 (large plate only): Attach adhesive side of metal plate to interior of case, between device and inside of case. Plate will adhere to magnetic mount through rear panel of case.

NOTE: If choosing not to attach the metal plate to the device or case, please leave the adhesive backing in place. Position the plate between the device and interior of case with the metal surface facing the case.

OPTION 4 (small plate only): Similar to Option 3, attach the adhesive side of the small plate to the interior of the device's rear battery compartment cover (if space and design permit). Plate will adhere to magnetic mount through the rear battery cover. For more information please visit www.scosche.com/magmount.

POWER SOCKET MOUNT WITH USB CHARGER

1. Loosen the ring on the power socket mount counterclockwise.
2. Plug the mount into a 12V dash socket.
3. Tighten the ring clockwise to secure the mount in the socket.

Note: The USB port will illuminate blue to show it is activated for charging.

ATTACH DEVICE TO MAGNETIC MOUNT

REMOVING THE METAL PLATE

Use a thin plastic card to carefully lift the plates's adhesive surface from the mounting surface. Slowly lift up and remove the plate.

Documents / Resources

References

• Product registration | Register your purchase

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Scosche MAGICMOUNT MAG12V, MAG12VI - Power Socket Mount Manual