Scosche MAGICMOUNT XL, MAGTHD2, MAGTHD2I - Magnetic Dash Mount Manual

PARTS INCLUDED

(1) Magnetic mount with suction cup mount and bendable neck
(1) Small metal plate
(1) XL plate
(1) Cleaning wipe

MOUNTING THE METAL PLATE

This item is not to be used with any Qi Wireless Charging products as the metal plates can cause extreme heat that can cause burns and/or damage the device.

OPTION 1 (small or XL plate):
Attach adhesive side of metal plate directly to back of device.

OPTION 2 (small or XL plate):
Attach adhesive side of metal plate directly to back of case.

OPTION 3 (XL plate only):
Attach adhesive side of metal plate to interior of case, between device and inside of case. Plate will adhere to magnetic mount through rear panel of case.
NOTE: If choosing not to attach the metal plate to the device or case, please leave the adhesive backing in place. Position the plate between the device and interior of case with the metal surface facing the case.

MAGNETIC DASH MOUNT WITH BENDABLE FLEX NECK

MOUNTING WITH STICKGRIP SUCTION CUP

1. Find a location on your dashboard/windshield that is out of your direct line of sight.
2. Clean the surface on your preferred dashboard/windshield location using the included wipe.
3. Peel off the wrapping from the bottom of the base and position on your preferred location.
4. Press down on the base to apply pressure and lock the suction lever.

NOTE: stickGRIP™ suction cup may leave residue or discoloration on some surfaces. it may also leave a ring of residue when mounted to the dash.

ATTACH DEVICE TO MAGNETIC MOUNT

REMOVING THE METAL PLATE
Use a thin plastic card to carefully lift the plates's adhesive surface from the mounting surface. Slowly lift up and remove the plate.

Do not use the magnetic mount with any hard-drive based devices such as: iPod classic, iPod video and Zune MP3 players. Use caution whenever removing or handling plastic parts of any vehicle. Unnecessary force or pressure can cause pieces to crack or break. Please use a plastic card to remove the metal plates. Remove adhesive residue with a non-abrasive cleaner.

DO NOT RETURN PRODUCT TO THE RETAILER
IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS CALL US TOLL FREE:
1-800-621-3695 X3
HOURS
MON-FRI 8AM-5:30PM (PST)
SATURDAY 8AM-2PM (PST)
Register your product online at www.scosche.com/register