Atis Function - Raymarine Ray55E Owner's Handbook Manual

Chapter 4: Menu Settings

ATIS Function

This operation enables or disables the ATIS feature in the radio. This feature
accommodates users who travel outside the inland waterways and wish to
disable the ATIS function at that time.
If you purchased your Ray218E/Ray55E to include use on the inland waterways of
Note:
the contracting governments of the "Regional Arrangement Concerning the Radiotele-
phone Service on Inland Waterways"– also known as the Basel Agreement– your radio
has been programmed by your dealer to include ATIS. If ATIS is enabled, certain program-
ming steps have been implemented to protect the integrity of this agreement, including the
blocking of DSC functions when ATIS is active.
When ATIS is enabled, the following occurs:
• DSC functions are disabled.
• Dual Watch, Tri Watch and all Scan functions are disabled.
• The following International Channels are limited to 1 watt output power:
6, 8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, 77 (and 31, if enabled).
To enable/disable ATIS:
1. From the ATIS OPERATION menu, select ATIS FUNC.
2. Use the up/down arrow soft keys to set the ATIS function ON or OFF.
3. Press SELECT.
4. Press the DONE soft key to accept.
• If set ON, the ATIS icon appears and DSC functions are disabled.
• If set OFF, the ATIS icon disappears and DSC functions are enabled.
77 ATIS FUNC
ON
OFF
I
N
[BACK]
T
B A
SHIP/SHIP
SELECT
77 ATIS FUNC
ON
OFF
I
N
[BACK]
T
B A
SHIP/SHIP
SELECT
77 ATIS FUNC
ATIS ON
THEN
I
N
DSC OFF
T
B A
PRESS DONE
SHIP/SHIP
TO ACCEPT
BACK DONE
77
ATIS FUNC
ATIS OFF
THEN
I
N
DSC ON
T
B A
PRESS DONE
SHIP/SHIP
TO ACCEPT
BACK DONE
77
ATIS OPS
MY ATIS ID
ATIS FUNC
I
N
[BACK]
T
B A
SHIP/SHIP
SELECT
77
ATIS OPS
MY ATIS ID
ATIS FUNC
I
N
[BACK]
T
B A
SHIP/SHIP
SELECT
65