Speed Unit; System Test - Raymarine Ray55E Owner's Handbook Manual

68

Speed Unit

This parameter sets the unit for Speed that is used to display all data, including
information received from other instruments on the system. The speed unit
appears on the LCD when COG/SOG is displayed (see page 61).
72 SYSTM CONFIG
SPEED UNIT
I

SYSTEM TEST

N
VERSION
T
A
B
RESET
SHIP/SHIP
[BACK]
SELECT
System Test
This menu item displays status of four separate conditions:
Item
GPS
RAYMIC
HAILER
BATTERY
DSC
72
KNOTS
MPH
I
N
KPH
T
A
[BACK]
SHIP/SHIP
SELECT
Status Meaning
OK Valid NMEA signal received
NO NMEA signal not received
OK Raymic second station is connected
NO Raymic is not connected
OK Hailer horn speaker is connected
NO Hailer is not connected
OK Battery voltage within nominal limits (10.5–15.8 VDC)
NO Battery is below 10.5 VDC or above 15.8VDC
OK DSC processor is operating properly.
NO DSC processor is not operating properly.
Ray218E and Ray55E Marine VHF Radios
SPEED UNIT
72 SPEED UNIT
KNOTS
MPH
I
N
KPH
T
A
[BACK]
SHIP/SHIP
SELECT