Raymarine Ray55E Owner's Handbook Manual page 59

Chapter 4: Menu Settings
To manually set the GPS position and time settings:
1. Under the GPS SETUP menu, select MANUAL POS. The Manual Position
screen appears.
2. Using the CH/OK knob, fill in the Lat/Lon and time information, one character
at a time. The first character space is highlighted with a flashing underline.
A more-detailed description of manual character entry can be found in "Add-
ing a new Entry" on page 79.
• Rotate the CH/OK knob to scroll through the selections.
• When the desired character appears, push in the CH/OK knob to accept it.
• Use the < and > soft keys to edit selected characters, if necessary.
• Continue this process until all latitude data been selected.
• When the direction character is underlined, rotate the CH/OK knob to
• Press the CH/OK knob when the desired direction character is displayed.
• Use the same process to complete longitude information.
• Use the same process to complete time information.
3. Press DONE soft key when complete. The radio returns to the GPS Setup menu.
4. Select BACK to exit the menu.
72 GPS SETUP
MANUAL POS
I
SETTING
N
NMEA OUTPUT
T
B B
[BACK]
SHIP/SHIP
SELECT
72 MANUAL POS
27 07:3800N
I
080 04:8500W
N
10:30UTC
T
B B
PRESS DONE
SHIP/SHIP
TO ACCEPT
BACK <
The next character to be filled in sequence is underlined (_).
toggle between N and S, if necessary.
The first character in the longitude field is now underlined.
When time data is entered manually, the MAN indicator appears in front
of the time, which is displayed in UTC.
72
I
N
T
SHIP/SHIP
BACK
72
I
N
T
SHIP/SHIP
DONE > SELECT
MANUAL POS
_- --:----N
--- --:----W
--:--UTC
B B
GPS SETUP
MANUAL POS
SETTING
NMEA OUTPUT
B B
[BACK]
Select Characters Press OK
72
50 46.1700N
I
N 001 17.7100W
T
MAN10:30UTC
B A A
SHIP/SHIP
CH06 CH08
59
CH77