Related Manuals for Rackmount U-1602
Summary of Contents for Rackmount U-1602
- Page 1 1-866-207-6631 sales@rackmountsolutions.net 2 Console Cat5 KVM User Manual U-1602 / U-3202...
-
Page 2: Installation
U-1602 / U-3202 Cat5 Two Console KVM Installation screw A: M3.2 x 4.5 mm screw B: M4 x 10 mm ■ Install each bracket using screws pro- vided shown in Figure 1. Figure 1. Installing the bracket to the KVM. - Page 3 U-1602 / U-3202 Cat5 Two Console KVM Package Content (only for rackmount KVM) KVM switch x 1 pc Screw M3.2 x 4.5mm x 4 pcs Screw M4 x 10mm x 8 pcs Bracket x 1 set Receiver x 1 pc...
- Page 4 U-1602 / U-3202 Cat5 Two Console KVM Connection U-1602 Local Console Remote Dual power Cascade console with failover U-3202 Connection Rackmount KVM Receiver Cat5 cable (up to 132 ft) Cat5 cable (up to 1,000 ft) DG-100S dongle Connection KVM modules...
-
Page 5: Receiver Connection
U-1602 / U-3202 Cat5 Two Console KVM Receiver Receiver Box Front View Rear View Console Console 9VDC Local Computer Remote LEDs Select Keyboard Mouse Receiver Connection U-1602 / U-3202 9V DC Power Adapter Monitor Cat5 cable up to 1,000 ft... -
Page 6: Cascade Kvm Modules
Cascaded KVM ( Bank 2 to 8 ) must be single console Cat5 KVM - U-1601 / U-3201 ■ Cascading multiple KVM by CBC-6 cable ■ With the U-1602 cascade up to 128 servers. With the U-3202 cascade up to 256 servers. Cascade Rackmount KVM U-3202 Cat5 two console KVM... -
Page 7: Dongle Connection
DG-100 / DG-100S Dongle Connection DG-100 PS/2 dongle ■ To connect DB-15 connector to the computer’s video card ■ To connect keyboard connector to the computer’s keyboard port ■ To connect mouse connector to the computer’s mouse port mouse Cat5 KVM switch Keyboard DB-15 Cat5 cable... - Page 8 KVM Membranes Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 16 ports Bank no.
- Page 9 Password The password is disabled by default ( i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password Scroll Lock + Scroll Lock + U Press the KVM hotkey Scroll Lock + Scroll Lock + P Logout the KVM by pressing the hotkey In SUPERVISOR level, enter “00000000”...
-
Page 10: Osd Operation
KVM OSD OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected Access F1 MAIN MENU Logout the OSD menu Previous menu Cancel / Quit Enter Complete / Switch to selected port Switch to previous or next port PgUp/PgDn Switch to previous bank or next bank... -
Page 11: Kvm Hotkey
KVM Hotkey Local Console Hotkey Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp / PgDn... -
Page 12: Optional Accessories
Optional Accessories 1. Cat5 cable 1.1 CU-3 3 feet 1.2 CU-6 6 feet 1.3 CU-10 10 feet 1.4 CU-15 15 feet 1.5 CU-33 33 feet 1.6 CU-66 66 feet 2. Cat5 / USB KVM cascade cable 2.1 CBC-6 6 feet 3. -
Page 13: Dc Power 12V, 24V, 48V Input
DC Power 12V, 24V, 48V Input Input rating Input current l l u Output rating Ef? ciency Remarks: ■ Package does not include power cord... -
Page 14: Specification
Specifi cation U-1602 / U-3202 Cat5 KVM Port ▀ Number of ports: 16 or 32 Connector: RJ-45 Connectivity: DG-100S USB dongle / DG-100 PS/2 dongle up to 132 feet Local Console ▀ Graphic connector: HDDB15-pin VGA Resolution: Up to 1600 x 1200 Input device: 2 x USB type A for keyboard &... - Page 15 General How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun So- laris systems, Linux, or even Macs by a single KVM switch.
- Page 16 The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is –...
-
Page 17: Troubleshooting
Troubleshooting There is no LED display on KVM membrane switch Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. Power cycle KVM switch. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem If you switch to another port, please check the screen resolution is the same.