CV-S801 / CV-S1601 Installation Figure 1. Installing the bracket to the KVM. Figure 2. Fixing the KVM into the rack. USB DB-15 KVM screw A: M3.2 x 4.5 mm screw B: M4 x 10 mm ■ Install each bracket using screws pro- vided shown in Figure 1.
Package Content KVM switch x 1 pc Screw M3.2 x 4.5mm x 4 pcs Screw M4 x 10mm x 8 pcs Bracket x 1 set User manual x 1 pc Power cord x 1 pc USB DB-15 KVM...
Page 4
Connection Local Console CV-S801 CV-S1601 Connection Rackmount KVM Connection KVM modules back USB DB-15 KVM Cascade CB-6 KVM cable CB-6 KVM cable...
Cascade ■ With the CV-S801 cascade up to 120 servers. With the CV-S1601 cascade up to 128 servers. ■ Cascading multiple KVM by CBC-6 cable Cascade Rackmount KVM Local Console Cascade Cascade KVM modules Local Console Cascade USB DB-15 KVM...
Page 6
Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 8 ports Online Channel 16 ports...
Page 7
Password Password for CV-S801 / CV-S1601 The password is disabled by default (i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password Call KVM OSD menu by pressing the KVM hotkey Select “06 PASSWORD”...
Page 8
KVM OSD OSD Menu for CV-S801 / CV-S1601 MAIN CONTROLS ENTER A CHOICE: 01 LANGUAGE 02 PORTNAME 03 TIMEVIEW 04 SECURITY 05 FINDPORT 06 PASSWORD 07 CONSOLE 01 LANGUAGE 02 PORT NAME 03 TIME VIEW 04 SECURITY 05 FIND PORT...
58~100Hz / 0.98G (11ms / cycle) 443 x 180 x 44 mm / 17.3 x 7.1 x 1.73 inch CV-S801 / CV-S1601 : 4 kg / 9 lb 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch...
Page 13
General How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun So- laris systems, Linux, or even Macs by a single KVM switch.
Page 14
Can the USB KVM support the keyboard or monitor with a USB hub built-in ? The USB KVM switch is only capable of passing Keyboard, Mouse and Video signals. As a result, other USB devices with a USB hub will not work.
The LED on the Cat5 dongle will fl ash when plugged into the USB or USB server. The light will then become steady when the KVM switch has connected. If the LED light is on and not fl ashing when plugged into server, please unplug the USB or PS/2 and try again.