Related Manuals for Rackmount U-1601
Summary of Contents for Rackmount U-1601
- Page 1 1-866-207-6631 sales@rackmountsolutions.net High Density Cat 5 KVM User Manual U-1601 / U-3201...
-
Page 2: Installation
U-1601 / U-3201 Cat5 Single Console KVM Installation Figure 1. Installing the bracket to the KVM. Figure 2. Fixing the KVM into the rack. screw A: M3.2 x 4.5 mm screw B: M4 x 10 mm ■ Install each bracket using screws pro- vided shown in Figure 1. -
Page 3: Package Content
Cat5 Single Console KVM Package Content (only for rackmount KVM) KVM switch x 1 pc Screw M3.2 x 4.5mm x 4 pcs Screw M4 x 10mm x 8 pcs Bracket x 1 set User manual x 1 pc Power cord x 1 pc... - Page 4 Cat5 Single Console KVM Connection U-1601 Local Console Dual power Cascade with failover U-3201 Connection Rackmount KVM Connection KVM modules back Cat5 cable (up to 132 ft) DG-100S dongle Cat5 cable (up to 132 ft) DG-100S dongle...
-
Page 5: Cascade Kvm Modules
Cat5 Single Console KVM Cascade ■ With the U-1601 cascade up to 128 servers. With the U-3201 cascade up to 256 servers. ■ Cascading multiple KVM by CBC-6 cable Cascade standalone KVM Local Console Cascade KVM modules Local Console Cascade... -
Page 6: Dongle Connection
To connect DB-15 connector to the computer’s video card ■ To connect keyboard connector to the computer’s keyboard port ■ To connect mouse connector to the computer’s mouse port Cat5 KVM switch DG-100S USB dongle ■ To connect DB-15 connector to the computer’s video card ■... - Page 7 Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 16 ports Bank no. 32 ports Bank no.
- Page 8 Password The password is disabled by default ( i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password Press the KVM hotkey Logout the KVM by pressing the hotkey In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0”...
-
Page 9: Osd Operation
Complete / Switch to selected port Switch to previous or next port Switch to previous bank or next bank Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32 Remark: Display port 17 ~ 32 for 32 port model only fi... -
Page 10: Kvm Hotkey
Calling OSD menu Switch to previous port Switch to next port PgUp / PgDn Switch to previous bank or next bank Bank no. + Port no. Switch to specifi c port Turn the buzzer ON and OFF * Default the buzzer is ON Logout the KVM if password security is ON. -
Page 11: Optional Accessories
Optional Accessories 1. Cat5 cable 1.1 CU-3 3 feet 1.2 CU-6 6 feet 1.3 CU-10 10 feet 1.4 CU-15 15 feet 1.5 CU-33 33 feet 1.6 CU-66 66 feet 2. Cat5 / USB KVM cascade cable 2.1 CBC-6 6 feet 3. -
Page 12: Dc Power 12V, 24V, 48V Input
DC Power 12V, 24V, 48V Input Input rating Input current l l u Output rating Ef? ciency Remarks: ■ Package does not include power cord... -
Page 13: Specification
Dimension (W x D x H): Net weight: Packing Information ▀ Dimension (W x D x H): Gross weight: U-1601 / U-3201 16 or 32 RJ-45 DG-100S USB dongle / DG-100 PS/2 dongle HDDB15-pin VGA Up to 1600 x 1200 2 x USB type A for keyboard &... - Page 14 General How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun So- laris systems, Linux, or even Macs by a single KVM switch.
- Page 15 The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is –...
-
Page 16: Troubleshooting
The LED on the Cat5 dongle will fl ash when plugged into the USB or USB server. The light will then become steady when the KVM switch has connected. If the LED light is on and not fl ashing when plugged into server, please unplug the USB or PS/2 and try again.