Related Manuals for Rackmount IP-1602
Summary of Contents for Rackmount IP-1602
- Page 1 www.rackmountsolutions.net 1-866-207-6631 sales@rackmountsolutions.net IP DB-15 KVM User Manual IP-802 / IP 1602...
-
Page 2: Installation
IP-802 / IP-1602 IP DB-15 KVM Installation screw A: M3.2 x 4.5 mm screw B: M4 x 10 mm ■ Install each bracket using screws pro- vided shown in Figure 1. Figure 1. Installing the bracket to the KVM. ■... -
Page 3: Package Content
IP-802 / IP-1602 IP DB-15 KVM Package Content (only for rackmount KVM) KVM switch x 1 pc Screw M3.2 x 4.5mm x 4 pcs Screw M4 x 10mm x 8 pcs Bracket x 1 set User manual x 2 pcs... - Page 4 IP-802 / IP-1602 IP DB-15 KVM Connection Power Local IP-802 Input Console USB Serial Ethernet Cascade IP-1602 Connection Rackmount KVM Internet hub CB-6 Cat5 cable KVM cable Connection KVM modules Internet hub back CB-6 Cat5 cable KVM cable ■ For USB & serial connection, please refer to the attached IP KVM user manual...
-
Page 5: Cascade Kvm Modules
Cascaded KVM ( Bank 2 to 8 ) must be single console USB KVM - CV-S801 / CV-S1601 ■ With the IP-802 cascade up to 120 servers. With the IP-1602 cascade up to 128 servers. ■ Cascading multiple KVM by CBC-6 cable... - Page 6 KVM Membranes Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 8 ports Online Channel Selected Channel...
- Page 7 Password Password for IP-802 / IP-1602 The password is disabled by default (i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password Scroll Lock + Scroll Lock + U Press the KVM hotkey...
-
Page 8: Osd Operation
KVM OSD OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected Access F1 MAIN MENU Logout the OSD menu Previous menu Cancel / Quit Enter Complete / Switch to selected port Switch to previous or next port PgUp/PgDn Switch to previous bank or next bank... -
Page 9: Kvm Hotkey
KVM Hotkey Local Console Hotkey for IP-802 / IP-1602 Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock +... -
Page 10: Initial Ip Confi Guration
IP-802 / IP-1602 IP Remote Setup Quick Installation Guide of IP KVM for remote access Please perform the follow steps 1. Power off all KVM hardware and connected devices. 2. Connect the power supply to IP KVM 3. Connect the monitor, keyboard & mouse to console port of IP KVM (not applicable to integrated LCD drawer version ) 4. - Page 11 IP-802 / IP-1602 IP Remote Setup 4. Remote access the IP-KVM switch via Web Using the HTTP protocol or a secure encrypted connection via HTTPS and entering the confi gured IP address of IP KVM switch into the web browser to remote access the IP KVM switch.
-
Page 12: Optional Accessories
Optional Accessories 1. PS/2 3-in-1 KVM cable 1.1 CD-6 6 feet 1.2 CD-10 10 feet 1.3 CD-15 15 feet 1.4 CD-33 33 feet 2. USB KVM cascade cable 2.1 CBC-6 6 feet 3. SUN / iMAC USB to PS/2 adapter 3.1 SUN-31 kit 5. -
Page 13: Dc Power 12V, 24V, 48V Input
DC Power 12V, 24V, 48V Input Input rating Input current l l u Output rating Ef? ciency Remarks: ■ Package does not include power cord... - Page 14 Dimension (W x D x H): 443 x 180 x 44 mm / 17.3 x 7.1 x 1.73 inch Net weight: IP-802 : 4.5 kg / 10 lb IP-1602 : 5 kg / 11 lb Packing Information ▀ Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch...
- Page 15 General How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun So- laris systems, Linux, or even Macs by a single KVM switch.
- Page 16 The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is –...
-
Page 17: Troubleshooting
Troubleshooting There is no LED display on KVM membrane switch Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. Power cycle KVM switch. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem If you switch to another port, please check the screen resolution is the same.
Need help?
Do you have a question about the IP-1602 and is the answer not in the manual?
Questions and answers