Find A Contact; Beam A Contact; Using The Summary Screen - QTek 9090 User Manual

Find a contact:

Tap the Start
n
phone number, or address, select
From Contacts, start typing a contact name until you see it displayed on the screen. To
n
show all contacts again, tap the text box at the top of the screen and clear the text, or tap
the arrow icon to the right of the text box.
Tap one of the sets of letters displayed at the top of the contact list. This takes you to the
n
contact names beginning with those letters.
In the contact list, tap the category list (labeled
n
to which you've assigned a contact. To show all contacts again, select
view a contact not assigned to a category, select
To view the names of companies your contacts work for, in the contact list, tap
n
Company. The number of contacts that work for that company will be displayed to the right
of the company name.
Press and hold the top of the navigation pad until alphabetical letters appear on the screen in
n
large type. Then use the navigation pad to scroll through the alphabet and select a letter.

Beam a contact:

1. To beam a contact, in the contact list, tap and hold the contact. On the pop-up menu, tap
Beam Contact.
2. To beam multiple contacts, tap and drag to select the contacts. Then, tap
Contacts.
When using infrared (IR), align the
structed and within close range.
Change options:
1. In the contact list, tap
2. To increase the available space for displaying contacts in the list, clear
3. The area code and country/region for new contacts are automatically entered based on
the information in

Using the summary screen

When you tap a contact in the contact list, a summary screen is displayed. To change the
contact information, tap Edit.
Pocket PC Phone User Manual
menu > Programs > Find, enter the contact name (first, last, or middle),
Contacts
IR ports between the devices so that they are unob-
Tools > Options.
Country/Region settings.
for the type, and then tap Go.
All Contacts by default) and tap the category
No Categories.
91
All Contacts. To
View > By
Tools > Beam
Show ABC tabs.