QTek 9090 User Manual page 85

1. Click Start > Settings > Control Panel > Network and Dial-up Connections > Make
New Connection.
2. To continue, tap Next.
Dial-up to the
3. Select
4. Enable the option
through a local area network (LAN)
I connect through a phone line and a modem
5. Select
6. Enable the Use area code and dialing rules
*99#, and then Next.
7. Enter the username and password you use to log on to your ISP, and then click Next.
8. Enter a name for this connection, and then Next.
9. Select No when the installation wizard asks you to set up an Internet mail
then click Next.
10.After the installation is completed, click Finish.
Settings on your Pocket PC Phone
You need to complete these actions before you start using the
Pocket PC Phone:
GPRS SIM
A
n
Disable the ActiveSync
n
Disable the Infrared
n
tab > Beam. Uncheck
Insert your Pocket PC Phone to your PC/Notebook by
n
serial sync cable).
1. Tap the Start
2. Select the Serial
cable adapter.
3. Make sure that you have connected your device with a serial sync cable if you choose
Serial connection to a notebook or PC, tap Start.
Now you can start to dial the new dial-up connection you have created by tapping
Settings > the Control Panel > Network and Dial-up Connections
Connecting via USB Port
As with the connection via
start using the Wireless Modem
A GPRS SIM
n
Disable the ActiveSync
n
Disable the Infrared
n
tab > Beam, and then uncheck
Pocket PC Phone User Manual
Internet. Tap Next.
I want to set up my Internet connection
button, and Next.
card is inserted in your Pocket PC Phone.
com port connection of your PC.
function by tapping the
Receive all incoming
menu > Programs > Wireless
connection type from the drop-down list and insert the synchronization
serial or IrDA, you need to check the following below before you
on your Pocket PC Phone via
card is inserted in your Pocket PC Phone.
com port connection of your PC.
function by tapping the
Receive all incoming
manually, or I want to connect
option, and then Next.
checkbox and enter the telephone number
Wireless Modem
Start menu > Settings >
beams.
Serial connection (using the optional
Modem.
on your PC.
USB connection:
Start menu > Settings >
beams.
85
account, and
on your
the Connections
Start >
the Connections