Wireless Modem - QTek 9090 User Manual

84
Pocket PC Phone User Manual

6.10 Wireless Modem

This utility will simulate your device as a wireless modem, and let your PC/Notebook be
connected to a wireless network.
connection types: Serial, IrDA, USB, or Bluetooth.
Connecting via Serial Port or IrDA
Before create a new modem via
IrCOMM2k is a driver for
to exchange data with mobile devices. Go to
and install it on your PC by following the installation instruction provided on the web.
If you are using a
Pocket PC Phone as described below. No additional driver needs to be installed.
Settings on your PC
Contact your
less Modem
your PC first:
1. Click
2. Add
3. Enable the checkbox
4. Select
Modem, then select Next.
5. Select your modem port and click Next.
6. When a
Modem
modem list.
7. Highlight the modem you just created, click the
tab.
8. Enter the complete string in the
,"IP","APN","",0,0.
9. Remember to click the
string as mentioned above.
10.Click the
Keep pressing
A new standard modem is now set up successfully on your PC, but you still need to create
a new dial-up connection:
Wireless Modem
IrDA
Windows 2000
Serial port connection, you can just start the settings on your PC and your
ISP to get the APN (Access Point
with a serial port or IrDA
Start > Settings > Control Panel > Phone and Modem
a new modem by selecting the
Don't detect my modem; I will select it from a
Standard Modem Types
Modem installation is finished!
tab mentioned in Step
Change Default Preferences
General tab and set the
OK until the modem installation wizard exits.
allows you to select the various wireless
connection, you need install the software IrCOMM2k.
and XP. It emulates a serial port which can be used
http://www.ircomm2k.de
Name). Before you start using your
connection, you need to create a new modem on
Modem tab.
in the Manufacturers
screen appears, click
2. Now you can see a Standard 33600 bps Modem
Properties
Extra initialization commands:
Float control by selecting
to download the driver
Options.
list.
field, select Standard 33600 bps
Finish to go back to the
button, and select the Advanced
field: AT+CGDCONT=1
button after entering the required
None from the drop-down list.
Wire-
in the