TRIBIT XSound Go - Speaker Manual

Also See for XSound Go:

User manual (31 pages)

User manual (7 pages)

User manual (16 pages)

Table of Contents

Contents

1 What's in the box
2 Overview buttons & Indicators
3 Connections
- 3.1 Bluetooth connection
4 Stereo Mode
5 Buttons
6 Indicator
7 Reset
8 Specification
9 Safety instructions
10 Customer service
11 Documents / Resources
- 11.1 Download manual

TRIBIT XSound Go - Speaker Manual

What's in the box

Overview buttons & Indicators

Connections

Bluetooth connection

Stereo Mode

Make sure both speakers are on.
Press on one of the speakers to enter pairing state.
Press on the other speaker for 5s, then release the button to enter Stereo pairing when you hear the "Stereo mode". When you hear "Left channel" on the left speaker and "Right channel" on the right speaker, the "Stereo mode" is on.

Buttons

Button	Operation & Function
Power on/off	Press to turn on/off
Bluetooth	Press to enter pairing mode
Volume +	Press to increase the volume level
Volume -	Press to decrease the volume level
Play/Pause	Press to play/pause Music and answer/end call Long press to reject a call Press twice to skip to next track Press triple to skip to Previous track

Indicator

Indicator	Status
Blue indicator flashes slowly	Reconnection mode
Blue indicator flashes quickly	Bluetooth pairing mode
Blue indicator keeps on	Pairing has been successful
Red indicator flashes slowly	Low battery power (<15%), charge the speaker as required
Red indicator flashes quickly	Low battery power (<2%) and will automatically power off after 5s charge the speaker immediately

Reset

If this speaker has some problem, you can try to press and hold "Volume +" and "Volume -" button simultaneously for 5 seconds to reset, and then pairing again (delete the old pairing in your device).

Specification

Bluetooth version: V5.0
Support: A2DP, AVRCP, HFP, HSP
Output power: 2 x 8W
Battery: 3.7V, 4400mAh
Battery charge time: 5 hour
Input: DC5V/1A
Dimension: 175 x 59 x 56 (mm)
Weight: 380g