TRIBIT StormBox Pro - Speaker Manual

Packing List

Product Illustration

Charging

1. To Charge the Speaker
   Connect this speaker to a 5V power outlet via the providing USB-Charging cable.
   

2. To Charge Other Devices
   Connect the speaker with your USB-enabled device via a USB-A charging cable(not included).
   
3. Charging Indicator
   

   	Red indicator is flashing	Low battery
   	White indicator is flashing	Charging
   	All indicators turn off	Fully charged

4. Battery Indication

   10-30%	30-50%	50-70%	70-80%	80-100%	Fully charged

• The Storm Box Pro Speaker will automatically connect to the last 2 paired devices again if available. If it fails, the speaker will enter to pairing mode. You can connect this speaker with multiple devices and control the connection via Bluetooth button.
• The speaker can remember up to 8 paired Bluetooth devices.
• Better still, it can connect to 2 devices simultaneously at a time.

3. Conversion between 2 Connected Devices
   1. Pause the playback of the current device
   2. Play the audio file of the other device
4. Volume Adjustment
   

   	Short press	Decrease volume
   	Keep it pressed for seconds	Continuously decrease volume
   	Short press	Increase volume
   	Keep it pressed for seconds	Continuously increase volume

5. Multifunctional Button (MFB)
   

   	Music Mode	Short press	Play/Pause
   		Double press	Next Track
   		Press it for 3 times	Previous Track
   		Press and hold it for Is	Activate Siri
   	Conversation Mode	Short press	Answer/ End phone call
   		Press and hold it for Is	Reject phone call
   		Short press	Pause the current call and answer the incomin call
   		Short press	Switch between two phone calls

6. XBass Function
   Short press the button to activate the XBass function, then the XBass indicator will glow white. Short press this button again to turn off the XBass function, and the XBass indicator will light off.
   
7. Party Mode
   
   1. Make sure both of two speakers are turned on.
   2. Press and hold the button of one speaker for 5s to enter pairing status, then press and hold the button of the other speaker for 5s to search for Bluetooth devices. At this time, you' II heara "Party mode" sound and the speakersenter party mode.

Note: The function of party mode can be realized only when you have 2 Tribit Storm Box Pro speakers.

8. Stereo Mode
   
   1. Make sure both two speakers have entered party mode.
   2. Short press the button on any of the two speakers.
   3. When you hear the voice of "Stereo Mode", one speaker sounds "Left Channel" and the other sounds "Right Channel" the stereo mode is activated.

Note: The function of stereo mode can be realized only when you have 2 Tribit StormBox Pro speakers.

9. Conversion between Party Mode and Stereo Mode
   Short press the button on any of the two speakers.

10. Disable the Party Mode or Stereo Mode
    Pressand hold the button for 5s on any of the two speakers, then both will re-enter Bluetooth pairing mode.
11. Factory Reset
    Press and hold the Volume — and +button for 5s simultaneously to clear the pairing list and all settings, and the speaker will restore factory state.

Specifications

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TRIBIT StormBox Pro - Speaker Manual