TRIBIT StormBox Blast BTS52 - Speaker Manual

Packing List

Product Introduction

How to Charge

1. How to charge the speaker:
   Connect the speaker with one end of the provided power cord, and plug the other end into a power outlet.
   
2. How to charge other devices through the speaker:
   Connect the speaker and other devices with the USB-C charging cable.
   

Button Control

1. Power ON/OFF
   

	Short Press	Turn ON	The white light of the power indicator light is always on. In the low power state, the red light of the power indicator light flashes. In the charging state, the red light of the power indicator light is always on; after full charge, the red light of the power indicator light is off.
	Short Press	Turn OFF	All lights are off.
	Long Press for 8s	Forced Shutdown	All lights are off.

• When the StormBox Blast cannot work normally due to unknown reasons, long press the power button for 8S to achieve forced shutdown and then restart the StormBox Blast.

2. Bluetooth Connection
   

   Short Press

   Enter Bluetooth pairing mode

   Bluetooth indicator light flashes quickly

   StormBox Blast:

   • Automatically connects back to 1 paired device;
   • Connects 2 devices at the same time;
   • Memorizes 8 Bluetooth devices;
   • When two devices are simultaneously connected to the StormBox Blast, device A needs to pause the playback and then device B can play.
3. Multifunctional Button (MFB)
   

	Short Press	Play/Pause
	Short Press Twice Continuously	Next Track
	Short Press Three Times Continuously	Previous Track

4. Volume Adjustment
   

	Short Press	Increase the volume
	Long Press	Keep increasing the volume
	Short Press	Decrease the volume
	Long Press	Keep decreasing the volume

5. Lighting Atmosphere Effect
   

   Short Press

   Switch/turn off the lighting effect mode

   Lighting effect indicator white light is always on/ off

6. XBass Function
   

   Short Press

   Activate/turn off the XBass function

   XBass indicator white light is always on/off

7. Stereo Mode
   
   1. Please make sure that the two speakers are turned on.
   2. Long press the Bluetooth button of the speaker A for 5s to enter the Stereo Mode pairing (Note: this speaker will be regarded as the main speaker);
   3. Short press the Bluetooth button of the speaker B to enter the pairing mode (Note: If this speaker is already in pairing mode, there is no need to perform this operation);
   4. When you hear the prompt sound "stereo mode", the pairing is successful and the speaker A & speaker B enter the Stereo Mode. At this time, the main speaker will broadcast "left channel" and the secondary speaker will broadcast "right channel".

Warm Tip: For Stereo Mode, you need to have two Tribit StormBox Blast speakers. And make sure the firmware of both speakers have been upgraded to the latest version through the APP.

8. Reset
   
   • If the speaker has abnormal conditions, you can try to reset the Blast (Note: long press the ''volume +''and ''volume -'' buttons at the same time for 5 seconds). After resetting, the historical pairing information will be cleared, and you need to re-pair the Blast with the device before use.

Product Specifications

Customer Service

• 12-month warranty
• For more services, please visit:
  Email: support@tribit.com

Safety Precautions

• Do not place the speaker in a place where it is easy to fall.
• Do not disassemble, repair or modify this product by yourself.
• Keep the speaker away from extreme temperatures.
• Do not use the speaker in an outdoor thunderstorm environment.
• Do not use any corrosive cleaners or other chemical solutions to clean the speaker.