Selecting Digital Closed Captions; Selecting Digital Closed Caption Parameters; Clock Setting - Pioneer PDP-4270HD Operating Instructions Manual

Tuner Setup
09

Selecting digital closed captions

Use the following procedure to select digital closed captions:
Service 1 to 6.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Closed Captions". ( /
4
Select "Digital Settings". ( /
5
Select "Digital Service". ( /
6
Select the desired closed caption. ( /
Closed Captions
Digital Settings
• The factory default is "Service 1".
7
Press HOME MENU to exit the menu.
NOTE
• The Primary Caption Service is usually offered for Service 1,
and the Secondary Language Service is usually offered for
Service 2 if these services are available.

Selecting digital closed caption parameters

Use the following procedure to change such parameters of
digital closed captions as font size, font type, foreground and
background colors.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Closed Captions". ( /
4
Select "Digital Settings". ( /
5
Select "Font Size", "Font", or any other item. ( /
ENTER)
6
Select the desired parameter. ( /
Closed Captions
Digital Settings
7
Repeat steps 5 and 6 as necessary. ( ,
8
Press HOME MENU to exit the menu.
50
En
then ENTER)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
Digital Settings Digital Service
Service 1
Service 2 xxxxxxxxxxxxxxxxxxxxx
Digital Service Service 3 xxxxxxxxxxxxxxxxxxxxx
Service 4 xxxxxxxxxxxxxxxxxxxxx
Service 5
Home Menu
then ENTER)
then ENTER)
then ENTER)
then ENTER)
Digital Settings
Font Size
Large
Standard xxxxxxxxxxxxxxxxxxxxx
Font Size Small xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu
/ )
The following table shows the parameters selectable for each
item.
Item Selection
Auto/ Large/ Standard/ Small
Font Size
Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/
1
Font
Font 7
Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Font Color
Magenta/ Cyan
Auto/ Solid/ Transparent/ Translucent/Flashing
Font Opacity
Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Background
Color Magenta/ Cyan
Auto/ Solid/ Transparent/ Translucent
Background
Opacity
1
Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/
Font 3 (monospaced without serifs)/ Font 4 (proportionally spaced without ser-
Exit
ifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the bolded default
parameters are used. If you select parameters other than
"Auto", the selected parameters are used regardless of the
provider's specifications.

Clock Setting

With "Auto Set" selected for Clock Setting, the system acquires
and sets time information automatically. You can also
manually set the correct time. If you disconnect the power cord
from the power outlet or power blackout occurs, the set time is
cleared.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Clock". ( /
4
Select "Time Zone". ( /
5
Select a time zone for your area. ( /
then
Clock
Time Zone
6
Select "D.S.T.". ( ,
Exit
7
Select "Applies" or "Does Not Apply". ( /
• Make this selection, depending on whether summer
time is employed in your area.
Clock
D.S.T.
8
Select "Auto/Manual Set". ( ,
9
Select "Auto Set" or "Manual Set". ( /
then ENTER)
then ENTER)
then ENTER)
then ENTER)
Time Zone
Current Time:
Atlantic
9:55 pm EDT
Eastern
Monday
Central
05/17/04
Mountain
/ , then ENTER)
Daylight Savings Time
Current Time:
9:56 pm EDT
Applies
Monday
Does Not Apply
05/17/04
/ , then ENTER)
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit