Pioneer DVR-RT300 Operating Instructions Manual page 67

Editing
6 Press or to select "SET END" at the end
point of the scene you want to erase and press
ENTER.
The still image at the end point appears at the right
small screen.
EDIT TITLE
NAME Family
CHAPTER 2/3
LENGTH 00:15:58/00:30:17
00:10:20
SELECT
ENTER/
ENTER RETURN
SELECT
7 Check the erased scenes.
• Select "Preview" and press ENTER. Then the video
where the scenes between the start and end points
are erased is played back.
• Each operation button (F.FWD, REW, SKIP +, SKIP -,
PLAY, PAUSE/STILL) for playback also can be used.
8 Adjust the start and end points.
• To adjust the start point, select "Adjust start" and
press ENTER. You can change the start point every
one frame by pressing
• To adjust the end point, select "Adjust end" and
press ENTER. You can change the end point in the
same way as the start point.
9 If you determine the scene to be erased, press
or to select "Finish" and press ENTER.
• A chapter mark is automatically added at the
location of the erased scene.
Note
• It is no problem to omit the procedures for confirm-
ing the scene or adjusting start and end points.
00:15:58
Adjust start
Adjust end
Finish
00:15:58
Preview
TITLE
BACK END
MENU
or .
07
67
En