The Operation Procedure For Inputting Characters - Pioneer BDP-430 Operating Instructions Manual

Settings
9
Press ENTER to test the connection.
10  to select
For setting the IP address, press
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes No
IP Address
Netmask
Gateway
Next
• If selecting "Yes": The IP address is automatically
obtained.
• If selecting "No": The IP address, netmask, gateway
and primary and secondary DNS IP addresses are
manually entered using the screen for inputting
characters. (See right.)
 to select "Next", then press ENTER.
11
Press
12
For testing the connection to the internet, after
confirming the settings, press  to select
"Test", then press ENTER.
• "Test" is available only when setting to obtain the IP
address automatically. "Test" cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
IP Address : xxx xxx xxx xxx
Netmask : xxx xxx xxx xxx
Gateway : xxx xxx xxx xxx
DNS Address : xxx xxx xxx xxx
MAC Address : xx:xx:xx:xx:xx:xx
Complete
Test
• As a result of the test, if the internet connection fails,
enter the setup values manually.
13  to select "Complete", then press
Press
ENTER.
The operation procedure for
inputting characters manually
Numeric characters such as IP address can be
entered on the input screen using the number buttons
(0 to 9) or  and ENTER on the remote control.
IP Address 123
Netmask
Gateway
1
Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Selected by Selected by
pressing  pressing 
2  to select the desired input mode.
Press
3  to
Press the number buttons (0 to 9) or
select a number/character, then press ENTER.
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel Left
* The same operation as RED, GREEN, BLUE, YELLOW and
selecting each of the items and pressing ENTER.
"Del.Char." stands for deleting characters.
4
Repeat the step 3 to display all of the desired
characters/numbers in the input field.
Example: The screen for inputting numeric characters
123
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
NOTE
• Press RETURN (Del.Char.) to delete a number/
character you have input.
• To change a number/character you have input, press
GREEN (Left) or BLUE (Right) to select the number/
character you want to change, and press
(Del.Char.). Then, press  to select a new number/
character you want to input, and press ENTER.
5
Press YELLOW (Complete) to fix the numbers
which have been input.
IP Address 123
Netmask
Gateway
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Right Complete Del.Char.
RETURN can be performed by
RETURN
23