Switching The Auto Antenna Setting; Setting The Illumination Color; Setting The Screen Color; Changing The Wide Screen Mode - Pioneer Super Tuner IIID AVIC-N4 Operation Manual

Dvd multimedia av navigation server
Hide thumbs Also See for Super Tuner IIID AVIC-N4:
Table of Contents

Advertisement

3
Touch "Polarity" to select an appropriate
setting for polarity.
Each time you touch "Polarity" switches
between the following polarity:
• Battery — When the polarity of the con-
nected lead is positive while the shift lever
is in the REVERSE (R) position
• GND — When the polarity of the connected
lead is negative while the shift lever is in the
REVERSE (R) position
Switching the auto antenna set-
ting
If the blue lead of the navigation system is con-
nected to the auto antenna of the vehicle, select
either of the following settings.
• Radio — Extends the antenna only for the
Radio source. The antenna is stored when the
source is switched to another source.
• Power — Extends the antenna when the igni-
tion switch is turned on. The antenna is stored
when the ignition switch is turned off.
1
Touch "Antenna Control" in the System
menu.
Touching "Antenna Control" switches
between "Radio" and "Power".
❒ Regardless of whether "Radio" or
"Power" is selected, turning off the igni-
tion switch will cause the antenna to auto-
matically retract.

Setting the illumination color

The illumination color can be selected Blue or
Red.
1
Touch "Illumi Color" in the System menu.
2
Touch desired color.

Setting the screen color

You can select one of five colors as the screen
color.
1
Touch "Screen Color" in the System
menu.
2
Touch desired color.
• White/Blue/Yellow/Red/Green
132

Changing the Wide Screen Mode

• For safety reasons, you cannot use some of
these navigation functions while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
apply the parking brake (see page 13 for
details).
1
Touch "Wide Mode" in the System menu
to select the desired setting.
Touch "Wide Mode" repeatedly to switch
between the following settings:
Full (full) — Just (just) — Cinema (cinema)
— Zoom (zoom) — Normal (normal)
Full (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, enabling you to enjoy a 4:3 TV picture
(normal picture) without any omissions.
Just (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizon-
tally toward the ends of the picture, enabling you
to enjoy a 4:3 picture without sensing any dispar-
ity even on a wide screen.
Cinema (cinema)
A picture is enlarged by the same proportion as
Just in the horizontal direction and by an inter-
mediate proportion between Full and Zoom in
the vertical direction; ideal for a cinema-sized pic-
ture (wide screen picture) where captions lie out-
side the frame.
Zoom (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cin-
ema-sized picture (wide screen picture).
Normal (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
❒ Different settings can be memorized for each
video source.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic n4 - navigation system with dvd player

Table of Contents