Pioneer Super Tuner IIID AVIC-N4 Operation Manual page 158

Message
• Scaling down.
• Scaling up.
• No map data available on this
scale. Scaling up.
• No map data available on this
scale. Scaling down.
Failure in the memory recovery proc-
ess.
Memory navigation is presently not
possible.
The map data could not be stored.
Previous setting will be kept.
This function is not available with the
current map disc.
Failed to save to memory. Please re-
enter setting.
CAUTION!
System detected improper connec-
tion of Parking Brake lead.
Please check your configuration for
safety.
Please see Operation Manual for
more information regarding safe
operation.
Viewing of front seat video source
while driving is strictly prohibited.
156
When
In the memory navi mode, if the DVD
Map Disc is inserted without chang-
ing the scale (only when the point is
stored on the DVD Map Disc).
When the scale that had been previ-
ously displayed cannot be displayed
for the following reasons:
• The disc was ejected and the sys-
tem was changed to the memory
navi mode.
• In the memory navi mode, the map
was scrolled to outside the memory
area. Or, the vehicle moved outside
of the memory area.
• The map was scrolled to areas not
stored on the DVD Map Disc. Or,
the vehicle moved to unrecorded
areas.
• The map was scrolled from unre-
corded areas to the memory area.
Or, the vehicle moved from unre-
corded areas to the memory area.
Failed to complete the recovery of the
memory area because the disc could
not be read for some reason, result-
ing in deletion of the memory.
Recovery was performed for the
memory area after failing to read the
disc data for some reason. (The
memory area that was previously set
will be recovered.)
The current position is "areas not
stored on the DVD Map Disc" and an
attempt was made to zoom in to
make the scale 0.5 mile or more.
The settings could not be saved for
some reason.
Parking brake lead is incorrectly con-
nected.
Parking brake interlock is activated.
What to do
The scale automatically returns to
the scale that was set in the DVD
navi mode before being changed to
the memory navi mode.
If the desired scale cannot be
selected, insert the DVD Map Disc
that contains that area and then
change the scale.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
Zoom in again after the vehicle
moves into an area stored on the
DVD Map Disc.
Or, replace the DVD Map Disc and
try to zoom in again.
• Retry.
• Consult the Pioneer Local dealer if
this message persists.
Confirm once more that their con-
nections are correct.
Park your vehicle in the safe place
and apply the parking brake.
➲ Parking brake interlock ➞
Page 13