Synchronizing With Exchange Server - Pharos Traveler 619 User Manual

3.5 Synchronizing with Exchange Server

To set up your device to synchronize directly with Exchange Server, you will need to get the name
of the server and the server domain name from your service provider or system administrator. You
must also know your Exchange user name and password.
Before changing synchronization settings on the device, disconnect it from your PC.
1. On your device screen, tap
to sync with it.
2. Enter your Email address and then tap Next.
3. Enter your user name, password and domain name, then tap Next. If you want the device to
save your password so that you will not need to enter it on each connection, select the Save
password checkbox.
4. In Server address, enter the name of the server running Exchange Server, then tap Next.
Select This server requires an encrypted (SSL) connection if you want to receive personal
information more securely. However, if you select this option and your ISP does not support an
SSL connection, you will be unable to receive e-mail.
5. Select the check boxes for the types of information items that you want to synchronize with
Exchange Server.
6. To change available synchronization settings, select the type of information, and tap Settings.
7. To change the rules for resolving synchronization conflicts, tap Menu > Advanced.
8. Tap Finish.
You can also use ActiveSync or WMDC to set up the device to synchronize remotely with the Exchange Server. The set up wizard is started
when you connect the device to your PC after installing ActiveSync or WMDC on the PC.
> Programs > ActiveSync and then tap setup your device
Pharos Traveler 619 Pharos Traveler 619
39