Synchronizing With Exchange Server - Pharos Traveler 127 User Manual

3.5 Synchronizing with Exchange Server

To set up the device to synchronize directly with Exchange Server, you will need to
get the name of the server and the server domain name from your service provider or
system administrator. You must also know your Exchange user name and password.
1. On the device screen, select Start > Programs > ActiveSync and then select set
up your device to sync with it.
2. Enter your Email address and then tap Next.
3. Enter your user name, password and domain name, then select Next. If you want
the device to save your password so that you will not need to enter it on each
connection, select the Save password checkbox.
4. In Server address, enter the name of the server running Exchange Server, then select
Next. Select This server requires an encrypted (SSL) connection if you want to
receive personal information more securely. However, if you select this option and
your ISP does not support an SSL connection, you will be unable to receive e-mail.
5. Select the checkboxes for the types of information items that you want to
synchronize with Exchange Server.
6. To change available synchronization settings, select the type of information and
then select Settings.
7. To change the rules for resolving synchronization conflicts, select Menu > Advanced.
8. Tap Finish.
NOTE: You can also use ActiveSync or WMDC to set up the device to synchronize remotely with
the Exchange Server. The set up wizard is started when you connect the device to your
PC after installing ActiveSync or WMDC on the PC.
35