Receiving A Fax Manually - Panasonic KX-FL511 Operating Instructions Manual

High speed laser fax and copier
Table of Contents

Advertisement

7
Press {DIRECTORY PROGRAM} to exit the
program.
4.4.3 Erasing a stored entry from
the broadcast memory
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
("<BROADCAST1>", "<BROADCAST2>" or
"<MANUAL BROAD>").
3
Press {DIRECTORY PROGRAM}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired entry you want to erase.
L To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L To erase other entries, repeat steps 5 to
7.
8
Press {DIRECTORY PROGRAM} to exit the
program.
4.4.4 Sending the same
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 36).
3
Press the desired {BROADCAST} (1-2) or
{MANUAL BROAD}.
L The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
L After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L If you select "FINE", "SUPER FINE", "PHOTO"
or "PHOTO WITH TEXT" resolution, the
number of pages that the unit can transmit
will decrease.
L If the document exceeds the memory
capacity, sending will be canceled.
L If one of the entries is busy or does not
answer, it will be skipped and redialed later
up to 2 times.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
"BROADCASTING".
L The display will show "SEND
CANCELED?".
2. Press {SET}.
Receiving Faxes
4.5 Receiving a fax
manually
4.5.1 Activating TEL mode
OFF
{STOP}
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
L The AUTO ANSWER light is OFF.
How to receive calls
1. When the unit rings, lift the handset to answer
the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
4. Fax
{FAX START}
TEL MODE
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx fl511 - b/w laser - fax

Table of Contents