Panasonic KX-FL511 Operating Instructions Manual page 28

2. Preparation
2.7.4 How to setup
{A}{B}
1
Set the fax machine to FAX ONLY mode by
pressing {AUTO ANSWER} repeatedly to
display the following.
L The display will show the number of rings
before the fax machine answers a call in
FAX ONLY mode.
L You can change the ring count setting by
pressing {A} or {B}.
Press {SET} to complete the ring count
setting.
L The AUTO ANSWER light is ON.
2
Confirm the automatic answer feature on the
computer is set to off.
2.7.5 How to receive calls
When receiving calls, the fax machine will
automatically answer all calls and only receive
fax documents.
Note:
L If you use your computer as an answering
machine, please refer to page 21.
L When the fax machine is using the telephone
line (e.g., during phone calls, fax
sending/receiving), the telephone line is busy
and MODEM cannot be used.
L When the PC is using the telephone line, the
following will be displayed:
Do not use the fax machine while the
message is displayed, or else the PC
activities could be disturbed.
26
ON
{SET}
FAX ONLY MODE
3 RINGS [±]
EXT. IN USE
For Fax Advantage assistance, call 1-800-435-7329.