Main Unit; The Unit's Display - Panasonic Diga DMR-EZ37 Operating Instructions Manual

Main Unit

Remote Control
signal sensor
EJECT
POWER
IN 2 IN 2 S VIDEO L L /MONO AUDIO R /MONO AUDIO R
VIDEO
 Cassette eject button .....................................( 65)
 Disc tray open/close button .............................( 7)
 Start recording .................................................( 8)
 Stop button ..................................................( 7, 8)
 Play/1.3 button ..............................................( 7)
 DVD/VHS POWER on/off button
(/I POWER) ..................................................( 6)
 Press to switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small amount
of power.
 IN2 input terminals (IN2) ...............................( 28)

The Unit's Display

 Recording indicator
 TV indicator
The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV]

6 ) .
(
 Main display section
 Tape indicator
 Disc indicator
This indicator lights up when a disc that is supported by this unit
is inserted.
Cassette
compartment
The unit's display
Opening the front panel
Press down on the
part with your fi nger.
 DVD/VHS drive indicator .................................( 7)
 Lights when the DVD or VHS drive is selected.
 DRIVE SELECT button....................................( 7)
 Drive changes each time you press [DRIVE SELECT].
 Channel Select ................................................( 6)
 Connector for a digital video (DV)
camcorder .....................................................( 29)
 Reset button ..................................................( 67)
 One Touch Copying operation button
 From VHS to DVD
 From DVD to VHS
 Scheduled recording indicator ( 9)
On:
When a scheduled recording program is registered and a
recordable disc or tape is inserted.
Flashes:
The scheduled recording indicator fl ashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc or tape,
etc). It does not fl ash if Quick Start is off.
 Progressive indicator
This indicator lights up when you select "On" in "Progressive"

(
OPEN/CLOSE
CH REC
DRIVE SELECT
COPYING COPYING
COPYING
.............................................( 10)
.............................................( 11)
35).
Disc tray
COPYING
RESET
61
RQT8849